Flying Leathernecks Decals / Orion Scale Models

Includes: * markings for 6 aircraft * stencils for 2 aircraft * serial numbers for all 40 F-18's in the Kuwaiti Air Force

This is a CD which includes approximately 387 high res photos of the AH-1W Cobra. CD is divided into six sections: Pilot's Cockpit Gunner's Cockpit Fuselage Hellfire Missile In-flight Photos Afghanistan

Includes 604 high resolution walk around photos.

Includes 185 high resolution walk around photos.

The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR. Designed for the Dream Model AH-1Z kit

Set includes six (6) Mk-82/BLU-111 bombs with KMU-572 tail assemblies and nose strakes attached. Also included are six (6) DSU-33 proximity fuzes, six (6) MXU-735 solid nose plugs and six (6) Ogive nose plugs.

Set includes six (6) Mk-83/BLU-110 bombs with KMU-559 guidance kit and tail assemblies attached. Also included are six (6) each of the following : DSU-33 proximity fuzes, MXU-735 solid nose plugs and Ogive nose plugs.

This set includes six (6) Mk-83 1000lb bombs with conical fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used...

This set contains six (6) Mk-82 500lb bombs with thermal protective coating and BSU-86 retarded fins. Also included are six (6) each of the following : M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be...

Set of four (4) 3D printed launchers The LAU-7/A was developed in June of 1958 for use on the F4H-1 (F-4B) and designed to be used with the AIM-9B missile. This version was in service until May of 1969 when AAC-545 was introduced.

Set of four (4) 3D printed launchers In May of 1969, AAC 545 introduced the Fin Retaining Clip for the AIM-9D/G/H Sidewinder, creating the LAU-7/A-1. In January of 1971, AAC-537-1 introduced the Detent Holdback Pin, creating the LAU-7/A-2. By 1972, the...

Set of four (4) 3D printed launchers In September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4. In June of 1980, AAC-736 was introduced and the launcher became the LAU-7/A-5. The...

Set of four (4) 3D printed launchers In February of 1964, the LAU-7A/A was introduced as a USAF version of the LAU-7/A that incorporated provisions for launching the TDU-11/B Target Rocket. The LAU-7A/A was used interchangeably with the Aero-3B on USAF...

Set of four (4) 3D printed launchers In January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6. Over the course of the next several years, numerous AAC's changed the designation of the launcher to...

Set of four (4) 3D printed launchers The LAU-7F/A was first introduced in 2008, with more widespread use by 2010. This version is used primarily on USMC F/A-18C/D aircraft.

This set includes six (6) Mk-83 1000lb bombs with BSU-85 fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used...

The FPU-6/A Oval Fuel Tank was developed for the F/A-18A/B Hornet in 1978 and used on the FSD aircraft, as well as a few fleet Hornets into the mid 1980's. It was phased out due to fatigue anomalies caused by the oval configuration. This set includes...

This set includes six (6) Mk-77 Fire Bombs. Light sanding to remove print support nibs is necessary on the aft end of the bomb

  This set contains two Mk-82/BLU-111/B Thermally Protected bombs, two MXU-735 solid nose plugs and two KMU-572 JDAM kits. For use with the Hobbyboss 1/18 AV-8B

FL32003 'Hornets Swarm' US Marine Corps F/A-18A/C in Combat Part I This two sheet set features markings for two F/A-18A's, one F/A-18A+ and three F/A-18C aircraft as they appeared during deployments in support of combat operations. VMFA-333...

  VMFA(AW)-533 BuNo 164959 Operation Iraqi Freedom, Al Asad Air Base, Iraq 2008 VMFA(AW)-224 BuNo 164699 MCAS Iwakuni, Japan 2009 VMFA(AW)-332 BuNo 164870 Operation Deny Flight, Aviano Air Base, Italy 1994 - One of several F/A-18D's from the...

Markings options include :VMA-542 OIFVMA-542 OEFVMA-214 OIFVMA-231 OIRVMA-311 OIRVMA-223 OIR

For F-18A through F-18F Hornets. This item is 3D printed and comes ready to install. 'Glass' cut in .007 clear styrene also included.

This item is 3D printed and comes ready to install. 'Glass' cut in .005 clear styrene also included.

Mk-76 practice bombs (6 per pack) These new 3D printed bombs come ready to paint and install. Some very light clean up may be necessary at the aft end of the fins to remove any trace of the printing supports. Simply paint FS35109 Blue and...

This set includes two (2) Mk-83 1000lb bombs, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was...

AN/ALQ-144, ready to paint and attach to your model. This set includes one (1) AN/ALQ-144. For AH-1W, AH-64A/D/E, UH-1N, H-60, OH-58, VH-3D and OV-10

This set of pylons corrects the inaccurately shaped pylons included in the Academy kit. Each set is 3D printed to ensure the best quality possible, as well as to minimize the work required to prepare them for installation on your model. An added...

This set contains four correct SUU-63A/A wing pylons and one correct SUU-62A/A centerline pylon for the F/A-18A+, A++, C and D. These pylons are correct for F/A-18A+ thru D aircraft with BuNo's 163427 thru 163782. This set of pylons corrects the...

This set contains four correct SUU-63C/A wing pylons and one correct SUU-62C/A centerline pylon for the F/A-18A++, C and D. These pylons are correct for F/A-18C and D aircraft with BuNo's 163985 thru 165532, as well as F/A-18A++ aircraft after...

This set contains all of the parts necessary to convert the Academy 1/32 F/A-18D into an ATARS Configured aircraft. The Advanced Tactical Airborne Reconnaissance System (ATARS) had its combat debut in 1999 with VMFA(AW)-332 during Operation Allied Force...

  This set includes four (4) corrected Pitot Tubes for use on the F/A-18A thru D, F-14A/B/D, A-7D/E and F-8E. Directly replaces kit parts in the Academy, Tamiya and Trumpeter kits

This set includes two empty LAU-68F/A pods. The F/A is 11 inches longer than the LAU-68D/A and is used exclusively with the 2.75 APKWS rockets. Pod is used by the F/A-18, AV-8B, AH-1Z, UH-1Y, A-10, F-16 and a number of other aircraft. Pods are 3D...

Each set will include two fire bombs along with the stencils provided by AOA. Some minor clean up of the forward end of the bomb will be required to remove the print support nibs. A few swipes with a file and sanding sticks does the trick. Set...

This set includes two (2) Mk-83 1000lb bombs, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was...

Includes parts to build 6 bombs.

This set includes two (2) Mk-83 1000lb bombs with the Thermal Protective coating, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during...

This set includes two (2) Mk-83 1000lb bombs with the Thermal Protective coating, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC...

  This set includes four (4) highly detailed ADU-703 adapters with BRU-32 bomb racks for use on the Tamiya, Revell and Trumpeter 1/32 F-14A/B/D kits. Modification to the kit weapons rails will be necessary. Drawings with measurements on where to...

This set includes 6 buckets that can be used to replace those found in kits that may be under detailed.

This set contains six (6) Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following : M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be needed on the aft end of...

This set contains six (6) thermally protected Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following : M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be needed...

  Set of four (4) 3D printed launchers The LAU-7/A was developed in June of 1958 for use on the F4H-1 (F-4B) and designed to be used with the AIM-9B missile. This version was in service until May of 1969 when AAC-545 was introduced.

  Set of four (4) 3D printed launchers In May of 1969, AAC 545 introduced the Fin Retaining Clip for the AIM-9D/G/H Sidewinder, creating the LAU-7/A-1. In January of 1971, AAC-537-1 introduced the Detent Holdback Pin, creating the LAU-7/A-2. By...

Set of four (4) 3D printed launchers In September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4. In June of 1980, AAC-736 was introduced and the launcher became the LAU-7/A-5. The...

Set of four (4) 3D printed launchers In January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6. Over the course of the next several years, numerous AAC's changed the designation of the launcher to...

Set of four (4) 3D printed launchers The LAU-7F/A was first introduced in 2008, with more widespread use by 2010. This version is used primarily on USMC F/A-18C/D aircraft.

This set contains two accurate fuel tanks for the AV-8B Harrier and Harrier GR.5/7/9 Each tank comprises 5 parts with keys to correctly place both the fore and aft sections.

This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used exclusively and frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm. While limited in its use, the pod is still carried...

his set includes two (2) LAU-33 dual 5.00" Rocket Launchers with empty tubes. Used by the F-4 Phantom, F-8 Crusader, OV-10 Bronco

This set contains two (2) LAU-10 5.00" rocket pods with empty tubes. Tubes are hollow the whole length of the pod.

For the Academy kit

AN/ALQ-144, ready to paint and attach to your model. This set includes one (1) AN/ALQ-144. For AH-1W, AH-64A/D/E, UH-1N, H-60, OH-58, VH-3D and OV-10

This set includes two empty LAU-68F/A pods. The F/A is 11 inches longer than the LAU-68D/A and is used exclusively with the 2.75 APKWS rockets. Pod is used by the F/A-18, AV-8B, AH-1Z, UH-1Y, A-10, F-16 and a number of other aircraft. Pods are 3D...

This set includes six (6) buckets that can be used in a diorama setting (ordnance loading evolution) or to replace kit parts.

This set includes 6 buckets that can be used to replace those found in kits that may be under detailed.

Set of four (4) 3D printed launchers In January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6. Over the course of the next several years, numerous AAC's changed the designation of the launcher to...

This is a two piece 3D printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter. Simply glue the antenna to the top center of the base, paint and attach to your model. Parts come ready to install with no clean...

This set includes four (4) octagon shaped drip pans commonly found under aircraft, both on the flightline and in hangar spaces. Great for use in dioramas to add a little bit more realism to your scene. Parts come as shown in photo. Very light sanding...

This set includes two (2) XM158A1 Rocket Launchers. The Launcher was a seven-tube, reloadable, reusable, repairable 2.75" rocket launcher M158A1 was a variant of the M158 that included a modified hardback mount

This set contains two (2) LAU-10 5.00" rocket pods with empty tubes. Tubes are hollow the whole length of the pod.

This is a re-print of a sheet first released in 2009, but with several changes. Layout and artwork has been updated and several more options were added. CH-53E's Attached to the 22nd (HMM-261) and 11th (VMM-163) MEU's and from HMH-366, 461, 466 and...

Seven squadrons, 17 options

Covers one (1) AV-8B Night Attack and five (5) AV-8B II Plus Harriers operated by the United States Marine Corps as they appeared during Operations Enduring Freedom, Iraqi Freedom and Inherent Resolve. Designed to fit the Hasegawa 1/48 kit and printed...

8.5 x 11 inch sheet featuring three KC-130J aircraft from VMGR-252 and VMGR-352. Designed for Italeri kit with Attack Squadron conversion sets.. Screen printed by Microscale

Features 6 AV-8B II Plus Harriers and is designed to be used with the Hasegawa kit. AV-8B II Plus 165357 CG03 VMA-231 SPMAGTF-CR-CC US CENTCOM Operation Inherent Resolve 2017 AV-8B II Plus 165562 CG01 VMA-231 MCAS Cherry Point, NC 2019 AV-8B II Plus...