BarracudaCals

This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and we include new instrument faces for the instrument panel, a few cockpit placards and even some decals...

?Angie? P-47D-27-RE, serial number 42-26860 512th FS, 406th FG, 9th Air Force. Flown by Col. Anthony Grosetta. Based at Asch, Belgium, early 1945. Natural metal with yellow trim and Polished OD (not black) tailplanes. Note Curtiss Electric 13? paddle...

Markings options for: ?Boise Bee? P-47D-1-RE, serial number 42-7890. 334th FS, 4th FG, 8th Air Force. Flown by Lt. Duane Beeson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note early style cowl flaps and Curtiss ...

Markings options:Curtiss P-40K Warhawk ?White 13? 64th FS/57th FG. Flown by 1st Lieutenant Robert Johnson ?Jay? OvercashBased at Hadi Main, Tunisia. May, 1943.Overcash final score was 5 victories, the last two flying White 13 on April 26th,1944,...

Markings options: Spitfire Mk. VIII, Serial unknown HL-K308th Fighter Squadron, 31st Fighter Group, 15th Air Force, USAAF.Pilot - CO of 308th FS. Flown by Lt. Leland P. Molland. Castel Volturno, Italy. February, 1944.Molland was a 10.5 victory ace, 5...

P-51D-20-NA Mustang ?Double Trouble Two? 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel ?Wild? Bill Bailey. Raydon Airfield, England,1944-45. P-51D-15-NA Mustang ?The Millie G? 55th Fighter Group, 343rd Fighter Squadron,...

This sheet provides a complete set of stencils and placards for the cockpit of the P-51D. Over 100 tiny decals recreate the extensive markings found in the cockpit, from the North American Data Plates down to the tiny PULL marking on the droptank...

This set contains nearly 50 tiny stencil markings that replicate nearly all of the markings found in the wartime F4U-1, -1A and -1D Corsair cockpits. These markings will really bring the cockpit to life. Not for the faint of heart, but the hours you...

This sheet contains a complete set of external stencil markings for the DH Mosquito family. Included are alternate stencils in red aircraft with black undersides. our stencils are sharper, cleaner, thinner replacements for the kit decals, with an...

This sheet contains new, sharply printed gauge faces to replace the kit decal instruments, plus all of the many other stencils and placards found in the Mosquito cockpit. A simple and fun way to add a lot of visual interest to your Mosquito cockpit...

  This set consists of a decal sheet that gives you all the small stencils and placards typically found in Bf 109G cockpits. It also includes a beautifully detailed resin instrument casting that can be painted up and a choice of two different...

"Boise Bee" P-47D-1-RE, serial number 42-7890. 334th FS, 4th FG, 8th Air Force. Flown by Lt. Duane Beeson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note early cowl flaps style and Curtiss Electric narrow blade...

Markings options:Curtiss P-40K Warhawk ?White 13? 64th FS/57th FG. Flown by 1st Lieutenant Robert Johnson ?Jay? OvercashBased at Hadi Main, Tunisia. May, 1943.Overcash final score was 5 victories, the last two flying White 13 on April 26th,1944,...

Markings options: Spitfire Mk. VIII, Serial unknown HL-K308th Fighter Squadron, 31st Fighter Group, 15th Air Force, USAAF.Pilot - CO of 308th FS. Flown by Lt. Leland P. Molland. Castel Volturno, Italy. February, 1944.Molland was a 10.5 victory ace, 5...

P-51D-20-NA Mustang ?Double Trouble Two? 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel ?Wild? Bill Bailey. Raydon Airfield, England,1944-45. P-51D-15-NA Mustang ?The Millie G? 55th Fighter Group, 343rd Fighter Squadron,...

These decals date back to the Cooper Details days and a never completed 1/48 Welkin project. While the kit never materialized, we do have the decals. These decals may be used to replace the kit decals for the Planet Models Welkin Mk. I and Mk. II...

This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and we include new instrument faces for the instrument panel, a few cockpit placards and even some decals...

This sheet provides a complete set of stencils and placards for the cockpit of the P-51D. A mass of tiny decals recreate the extensive markings found in the cockpit, from the North American Data Plates down to the tiny PULL marking on the droptank...

This set consists of one set of complete stencils for just about any variant of the FW 190 family. These are very thin and beautifully printed by Cartograf, and replace the often thick stencils with hard to hide clear film found in all kits of the...

  This decal set consists of one complete set of external stencils in the early style serifed font. This includes alternate wing walk markings, gun port patches, Dunlop wheel logos, bomb markings, door stencils and white underwing stencils for...

This set consists of one set of complete stencils for Spitfires Mk VII through 24 and Seafires Mk XV through 47. Some factories retained the older stencil style into later marks. Includes cockpit door stencils and bomb markings. These are very thin...

"Boise Bee" P-47D-1-RE, serial number 42-7890. 334th FS, 4th FG, 8th Air Force. Flown by Lt. Duane Beeson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note early cowl flaps style and Curtiss Electric narrow blade...

"Kansas Tornado II" P-47D-25-RE, serial number 42-26742. 510th FS, 405 FG, 9th Air Force. Flown by Capt. Howard Curran. Based at St. Dizier, France, Fall, 1944. Natural metal finish with dark blue nose ring and canopy frames. Note cutback cowl flaps and...

Markings options for: ?Schmaltzie? P-47D-30-RE, serial number 44-20866 57th FG, 65th FS, 12th Air Force. Flown by Lt. F.J. Middleton. Based in Southern Italy, Summer, 1944. Weathered, dusty natural metal finish with faded, worn black or dark OD...

P-51D-20-NA Mustang ‹¨«‹¨«‹¨«Double Trouble Two‹¨«‹¨«‹¨« 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel ‹¨«‹¨«‹¨«Wild‹¨«‹¨«‹¨« Bill Bailey. Raydon Airfield, England,1944-45. P-51D-15-NA Mustang ‹¨«‹¨«‹¨«The Millie...

P-47D-21-RE 42-25518 B8*B ‹¨«??Damon‹¨«??s Demon," 379th FS, 362nd FG, USAAF. Flown by Capt. George Rarey, Based at Headcorn, England, June 1944P-47D-27-RE 42-27215 B8*T ‹¨«??1950‹¨«?‹¨«/‹¨«?‹¨«Super Rabbit," 379th FS, 362nd FG, USAAF, Flown by Lt...

This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and we include new instrument faces for the instrument panel, a few cockpit placards and even some decals...

This sheet contains markings for 6 different Spitfires operated by different air forces in 23 theatres. The sheet is thoroughly researched and beautifully printed by Cartograf. Complete with 2 full sets of stencils including door stencils and bomb...

This sheet features 7 interesting Gustavs with a wide array of colors and markings. Thoroughly researched by Anders Hjortsberg, who also created the stunning profile artwork, these are the culmination of years of research, and represent the latest...

This set consists of two complete sets of stencils for just about any variant of the FW 190 family. These are very thin and beautifully printed by Cartograf, and replace the often thick stencils with hard to hide clear film found in all kits of the...

This decal set consists of one complete set of external stencils in the early style serifed font. This includes alternate wing walk markings, gun port patches, Dunlop wheel logos, bomb markings, door stencils and white underwing stencils for black winged...

This set consists of two complete sets of stencils for Spitfires Mk VII through 24 and Seafires Mk XV through 47. Some factories retained the older stencil style into later marks. Includes cockpit door stencils and bomb markings. These are very thin...

Thunderbolts of the Hell Hawks - 365th Fighter-Bomber Group in Words, Pictures and Illustrations - Softbound. By Don Barnes, John Crump & Roy Sutherland Ninth Air Force P-47 units have been long overlooked, despite their significant contribution to...

This set contains a sheet of precut Kabuki type tape canopy masks for the Monogram B-1B Lancer kit. Includes masks for both the canopy clear panels and the sealing strips that surround each panel. It also comes with masks for the D-shaped flush DAS...

Accurate, detailed one piece resin seat with detailed backpad complete with stitching. Seat has added detail such as seams, rivets, strengthening plates and ribs, thinned edges for scale look, and leather guard in the seatpan. The seat is the most...

These new resin mainwheels replace the kit wheels. These new wheels feature more and crisper hub detail, as well as full tire beading, logos and data on the tyre sidewalls. There one piece castings avoid fit problems of multi-part wheels; a simple and...

This new resin intake ring directly replaces the kit part, which is well done, but has incorrect spacing between the intake tube and the outer ring due to mold tooling limitations. Our ring is properly proportioned, as well as being thinner and more...

Contains a one piece resin seat with much extra detail such as rivets, seams, strengthening plates and ribs and leather guard. Seat also features a molded-in accurate late war Q-style harness. The harness is molded in high relief with a slight...

Beautifully realized by respected sculptor Mike Good, and representing a mid to late war RAF fighter or fighter-bomber pilot, this new figure is a perfect for the new Airfix 24th scale Typhoon Mk Ib. Will also work for the Mosquito or later Mark...

This set of crew figures represent two RAF Armourers assembling a 3" rocket as fitted to Typhoons, Mosquitos, Beaufighters and other RAF aircraft during WWII. They are stunningly detailed and artfully posed by Vince Chmielewski. They have been...

This set consists of 4 detailed resin wheels for the Irving Napier land speed car that set a record of 231 mph in 1929. The Profil24 kit, which these are designed for, has wheel castings that are very rough, and you could spend hours on each one...

These new resin wheels are a huge upgrade to the Airfix Mosquito in 1/24th scale. They represent the late, dual brake style wheel fitted to all but the early B. Mk IVs and NF IIs, and feature detailed and accurate tread pattern, hub detail and tire...

This set consists of a pair of super detailed, accurate resin mainwheels as fitted to some Bf 109G-10 and most K-4 series aircraft. These wheels represent the the wide, smooth tire fitted to the plain hub. Finely rendered raised sidewall fibbing...

This set contains a pair of super detailed, accurate resin mainwheels as fitted to the Bf 109G-4 thru G-14 series aircraft. This wheel features the ribbed hub and treaded tires, as seen on the vast majority of these Gustavs until later in the war...

This set contains new resin mainwheels featuring tires with accurate diamond tread pattern, logos and tyre data. The wheels also incorporate detailed hubs and separate hubcaps for an excellent 3 dimensional look. Diamond tread tires are the most...

This set contains new resin mainwheels featuring tyres with accurate crucifix style tread pattern, logos and tyre data. The wheels also incorporate detailed hubs and separate hubcaps for an excellent 3 dimensional look. Cross tread tires were not as...

This set contains a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed wheel hubs with separate uplock lugs. Designed to replace the rubber tire/plastic wheel hub assembly in the available kits...

This set contains a pair of accurate resin mainwheels featuring super detailed spoked hubs, subtly ribbed tires and readable logo and data as fitted to the Bf 109E and F series aircraft. Replace the problematic rubber tires found in the Airfix Me 109E...

This set contains a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed 5-slot wheel hubs. Designed to replace the rubber tire/plastic wheel hub assembly found in the Airfix and Trumpeter...

This set consists of a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed covered 5-slot wheel hubs. The covered hubs were used to keep mud and dirt out of the wheels hubs. Designed to replace...

This set contains one resin cast seat with molded in leather backpad to directly replace the Tamiya Spit VIII/IX kit part. The seat also features rivets and drain holes for added realism. Will also upgrade all other 1/32nd Spitfire models, such as the...

This set consists of a new resin cast cockpit door with separate crowbar that actually fits into the door's clips. Detailed down to the door latch springs, this little part is highly visible, so all that added detail really pays off. Will also upgrade...

Replaces the Tamiya kit parts for the control column, throttle quadrant, retract quadrant and compass with more detailed resin pieces. An oxygen hose is also included, and the set is completed with the inclusion of a revised and expanded sheet of...

Directly replaces the beautiful Tamiya kit rocker covers for the two Stage Merlin 60 series engine with new resin covers that feature the much sought after Rolls-Royce logo plates molded on. A simple detail upgrade for the engine compartment.

As fitted to Spitfires Mk. I through the early Mk. IX. The 5 slot wheels in the Tamiya kit are superb, but the soft rubber tyres (British spelling for a British aircraft!) have a mold parting line that is very difficult to get rid of, plus they have...

As fitted to the Spitfire Mk. IX through Mk. XIX. The 4 slot wheels in the Tamiya kit are superb, but the soft rubber tyres have a mold parting line that is very difficult to get rid of, plus they have a natural tendency to attract every piece of...

The wide blister C wing gun covers in the Tamiya kit are very nice, but the cannon fairing blisters are too square in the front. This set directly replaces the kit's upperwing gun covers with more rounded resin castings. A simple way to accurize...

For the Tamiya kitDesigned to replace the kit lower sidewall for the Tamiya Spitfire VIII, IX, and XVI. This set also includes the missing remote contactor. The new resin sidewall has been molded with all the complex plumbing of the windscreen de-icer...

For the Hasegawa and HobbyBoss kitsThis treaded tire was fitted to Australian Mk. V Spitfires, and any other Spitfire with 5 slot wheels that needed additional traction due to harsh operating conditions. This style of tread was referred to a Z-block,...

For the Tamiya/Pacific Coast kitsThis treaded tire was fitted to Australian Mk. VIII Spitfires, and any other Spitfire with 4 slot wheels that needed additional traction due to harsh operating conditions. This style of tread was referred to a...

This little upgrade set consists of a super-detailed Mark II reflector Gunsight and the later Ace Maker II Gyro Gunsight, as well as the dedicated gunsight mounts for each type. Further detail is provided by the junction box, dimmer control and throttle...

This set consists of new super detailed, accurate resin sidewalls, which replace the Tamiya kit parts. Many handles and levers have been molded separately to ease painting and improve accuracy. A fret of photoetched parts rounds out this set, and it...

The Tamiya kit instrument panel is replaced with a mixed media parts featuring a resin main panel with improved knobs and switches. The main instrument panel has been replaced with a multi-part photoetched assembly with readable and authentic film dials...

This upgrade set contains a number of cockpit components that benefit from being produced in resin, allowing more accurate and detailed parts for your P-51 Mustang's cockpit. Fully detailed radio and batteries come complete with a battery wiring diagram...

Super-detailed, seamless nose and tailcones for Tamiya?s 108 gallon drop tanks capture the rough, scalloped look of the paper mache. The paper drop tanks in the Tamiya Mustang kit are accurate in shape and size, but they do not capture the "look" of the...

This simple two part resin upgrade set replaces the kit intake manifolds for the following kits:Roland D.IVa, Pfalz D.III, Pfalz D.IIIa, Albatros D.V and D.Va, Pfalz D.XII, Fokker D.VII. The parts are designed specifically for the above listed WNW kits...

This super-detailed resin exhaust manifold directly replaces the kit exhaust manifold in the gorgeous1/32nd scale WNW Pfalz. D.XII. Once removed from its casting block, it directly replaces the kit part. It has been upgraded with the addition of weld...

This set contains new, more accurate diamond tread tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These...

This set contains new oval tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless...

This set contains new hexagonal tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These...

This set contains new staggered block tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These...

This set contains a pair of accurate resin mainwheel hubs designed to fit our resin tires, for those not building the Tamiya P-51 kit. For modelers building a P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram and using our resin...

This set contains a pair of detailed resin mainwheels with crisply molded, seamless and accurate block tread pattern. You can choose between plain, covered or 6 slot hubs. The inner wheel hub detail is visible through the slots of the outer wheel hub,...

This set contains a pair of detailed resin mainwheels with crisply molded, seamless and accurate diamond tread pattern. You can choose between plain, covered or 6 slot hubs. The inner wheel hub detail is visible through the slots of the outer wheel hub,...

This set contains a pair of detailed resin mainwheels with crisply molded, seamless and accurate cross tread pattern. You can choose between plain, covered or 6 slot hubs. The inner wheel hub detail is visible through the slots of the outer wheel hub,...

This set consists of 4 superbly accurate and detailed resin mainwheels with authentic diamond tread that even replicates the narrower center row of diamonds. Wheels also feature fine raised tire beads and extremely fine raised tire size information...

A pair of beautifully detailed open engine cowl flaps and two accurate one-piece radiator units, complete with plumbing and actuator mounting ring are contained in this set. A full set of cowl flap actuator rods with spares are also included. When...

This set consists of detailed, accurate resin cast mainwheels with exacting tread pattern and a choice of two styles of ribbed hub nosewheel. The nosewheel tire patterns included are smooth and ribbed. The mainwheels are molded without the brake lines,...

This set consists of detailed, accurate resin cast mainwheels with exacting tread pattern and a choice of two styles of smooth hub nosewheel. The nosewheel tire patterns included are smooth and ribbed. The mainwheels are molded without the brake lines,...