Conversion Sets

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

Contains all the (mostly 3D printed) parts to convert the A-4E/F into a RNZAF Kahu. Cockpit upgrades include a new, modern instrument panel with multi function displays and instrument decals, a new throttle and stick top, rudder pedals, and gunsight...

  The beautiful Tamiya G-6 has one main problem: it's seriously limited in the number of schemes it can be built with due to a lack of alternate parts. This set supplies you with a tall fin and two different rudders, as well as the compressor bulge...

For the Italeri kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Italeri kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

Item #R32051

For the Tamiya kit

For the Tamiya kit

For the Revell kit

For the Academy kit

Converts Fw190 A-3 to A-4. Correction kit includes head rest and cowling parts, plus rudder.

Brassin set the conversion set for Mi-24D in 1/48 scale. Recommended kit: ZvezdaSet contains: 3D print: 5 parts resin: 7 parts decals: no photo-etched details: yes painting mask: no  

Collection of 4 sets to convert Mi-24V to Mi-24D in 1/48 scale. Recommended kit: Zvezda cockpit undercarriage wheels dashboard exhausts chaff dispensers and chin sensors painting mask  

For the Tamiya kit F- 16 CJ PW 229 Conversion Set The set allows conversion of the 1/32 Tamiya F-16CJ kit from MCID/ Large mouth/ GE powered version block 50/60 to the NSI/ Small mouth/ PW 229 Pratt Whitney Block 42/52/62 engine. Conversion and...

For the Tamiya kit 1/32 Scale NSI Intake / Engine conversion set for Tamiya F-16CJ Kit to early Block F-16 Builds

1/32 scale F-15 SG Super Set to convert the Tamiya F-15E kits. Kit is to compliment and requires the GE engine set offer by Aires (ARS2101)Set includes the following:SG airframe: - Highly detailed tail booms with sensors and flare dispensers- Digital...

1/32 Scale F-15 SG Decal Set. This comprehensive set features most all of the Singapore color schemes and is complete stencils...even includes the landing gear, Missile Rails, etc. For use when using the GT Resin 32025 F-15SG Conversion Set...

Exhaust, Fuselage correction set, canopy frame, and correct fin/rudder

Exhaust, Fuselage correction set, Canopy Frame, and Correct fin/Rudder, and Smooth side fuselage conversion

Basic Conversion of the First F-4C Wild Weasels used in Vietnam. Set Includes:‹¨«?‹¨« Antennas,‹¨«?‹¨« WSO Wild Weasel Instrument Panels‹¨«?‹¨« Airframe decals for two Kadena and one Nellis Jet‹¨«?‹¨« Strike camera, and...

1/32 Scale F-4E Slat Wing Set with TISEO made for the Tamiya F-4E/EJ kit The Set is the finest slat wing kit ever offered for converting the Tamiya hard wing f-4E kits into the Slat wing version. The wings are designed using current 3D CAD and 3D...

GTR 32058. F-4S Conversion Set for Tamiya F-4J kits. The GTR set is the only modern and complete conversion set to turn Tamiya‹¨«??s F-4J kit into the F-4S. The kit features the latest in CAD design and 3d technology to give you the most...

GTR32059 is and updated rerelease of our 1/32 scale , F-4B/N Super Set. It contains all of the necessary parts to convert any 1/32 scale Tamiya F-4J kit into any F-4B/N variant. It contains the following:Highly Detailed Resin Cockpit:‹¨«?‹¨« ...

1/32 Scale F-4E/F/G Slatted wing upgrade - Also fit the RF-4C?E kits if building the Greek Slatted wing Recce! The Set is the finest slat wing kit ever offered for upgrading the Revell F-4E/F/G kits with accurate and highly detailed Slatted outer...

For the Revell kit

USN style inner wing pylons with missile rails. The Bolo F-4C’s carried this pylon/missile rail set up during that time, as the rounded USAF style pylons were just bing introduced and not yet to front line units. For the Tamiya kit

Set of 4 Highly detailed LAU-129 Missile Launch Rails to upgrade the Tamiya F-16CJ kit. These rails are resin cast to fit the wing end stations and the underwing pylons used to mount AARAM and Sidewinder missiles. These rails are a must if using...

1/48 scale conversion set to convert the Zoukei-Mura F-4C kits into a Wild Weasel attacker. The set includes: ‹¨«?‹¨« NEW. Strike camera insert for forward fuselage bottom t ‹¨«?‹¨« All of the special ECM sensors, antennas, and nodes to...

1/48 scale conversion set to convert the Academy/Eduard F-4C kits into a Wild Weasel attacker. The set includes: ‹¨«?‹¨« NEW. Strike camera insert for forward fuselage bottom replaces the kit plastic part ‹¨«?‹¨« All of the special ECM...

Includes 31 parts + decals + photo-etch parts and is for the Hasegawa F-16B/D kit. Question: What is the difference between the older 'Sufa' kit and this one? Answer: In the new set we gave up the plane's intake and the big part for the lower aft...

  Includes: Resin parts, photo-etch parts and assembly instructions.

This set contains all of the parts necessary to convert the Academy 1/32 F/A-18D into an ATARS Configured aircraft. The Advanced Tactical Airborne Reconnaissance System (ATARS) had its combat debut in 1999 with VMFA(AW)-332 during Operation Allied Force...

For the Accurate Miniatures kit

Final version of RF-4E, it was design to add more speed to RF! This is why they called it "High speed nose". It has been used by US ANG towards end of F-4 use in USA but long years served in German, Japanese, Greek and Turkish AF after US...

Limited Edition For the Hasegawa/Kitty Hawk kit Cutting is required of the base kit.  Recommended for advanced modelers.

For the Hasegawa kit

For the Hasegawa kit

For the Eduard kit

For the Eduard kit

For the AMK kit

For the AMK kit

For the Hasegawa kit

For the Hasegawa kit

For the Tamiya kit

For the Tamiya kit

For the ESCI/Italeri kit

For the AMK kit

For the AMK kit

F-14A Iranian Alicat Update set for Tamiya 1/32 Refueiling probe and early type gas vent LAU-7/A Launcher set Metal pitot tube & AOA Decal by Hobbydecal, Printed by Hobbydecal/Cartograf A5 color printing manual included A3 color...

Hawker Hunter F.1/2/3/4 Conversion set for Academy 1/48 Hunter F.6 Straight wing edge and wingtip A5 color printing manual included

F/A-18D(N) Hornet ATARS Conversion set for Hasegawa 1/48 SJU-17/A NACES Ejection seats and correct glare shield ATARS nose parts & Double C/F Dispensers SUU-62/63 Pylon set GPS & Various antennas Total 24 resin parts, 2 clear parts and 1...

C-130H Hercules 'JASDF' Conversion set for Italeri 1/72 Correct engine cowlings and fuselage fairings, AAM sensors fairing and C/F dispenser pylons included, 8 Markings for JASDF C-130H,...

F-14A Iranian Ali-Cat Update set for Academy 1/72 Detailed refueling probe and bay details New designed decal for Iranian Ali-Cat during 1970 ~ 2000 Eras Total 3 resin parts with PE, Metal...

A6M2a Zero Model 11 conversion set for Tamiya 1/32 A6M2b Detailed Exhaust and cowl flap Early type rear canopy Decal for 3 a/c Decal by Crossdelta, printed by Cartogaf 6 resin part and 1 decal A4 color printing manual included