Tools-Cutting

Approximately 4.5 inches long

Approximately 4.5 inches long

Approximately 5.75 inches long. 

Handle for the CMK Saw Blades. Complete set. This set contains plastic parts for the handle, saw blade, two wood screws and one regular screw with nut. Very handy tool for all modelers.

The various interchangeable tips available for the VersaTip�?� Multipurpose tool let you create decorative patterns for wood-burning and leather-crafting, solder electronics, cut plastics and rope and much more. Ideal for wood-burning and...

A high-speed cutter with a 1/8" steel shank that makes fast clean cuts in drywall. Piloted tip to cut around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features...

Ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. You can also create decorative wall tile by cutting a design, such as a sailboat, and filling it with colored grout. Cuts ceramic wall tile, cement board and...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel?? #230 and #330 Router Attachments and #231 Shaper/Router Table. Made of high-speed steel. Ideal for routing, inlaying and mortising in wood and other soft...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel?? #230 and #330 Router Attachments and #231 Shaper/Router Table. Made of high-speed steel. Ideal for routing, inlaying and mortising in wood and other soft...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel?? #230 and #330 Router Attachments and #231 Shaper/Router Table. Made of high-speed steel. Ideal for routing, inlaying and mortising in wood and other soft...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel?? #230 and #330 Router Attachments and #231 Shaper/Router Table. Made of high-speed steel. Ideal for routing, inlaying and mortising in wood and other soft...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel Specially...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel Specially...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel Specially...

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. Removes material quickly and...

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. Removes material quickly and...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel Use...

Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired...

Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired...

Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired...

A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. Fast-cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. Use on...

A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. Fast-cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. Use on...

5/16" x 4 3/4" L with 4 jaw machined aluminum chuck for secure blade positioning, includes Super Sharp Blade assortment (5) and a Snig fitting plastic Cap for your protection. Used for precision cutting, trimming and stripping of paper, plastic, wood,...

7/16" x 4 3/4" L with 4 jaw machines aluminum chuck for secure blade positioning, includes Super Sharp Blade assortment and a Snug fitting plastus Safety Cap for your protection. Used for precision curring, trimming and stripping paper, plastic, wood,...

Includes K2 medium duty knife, K1 light duty knife with 10 assorted blades and safety caps for light or heavy duty cutting.

Comes with a K1 knife with safety cap, 5 assorted blades and a K3 pen knife, 5 #20010 blades for cutting, trimming and chiseling.

Size: 1 3/4" x 3/8" x 1 1/8" EdgeFits: K2, K5, K6 handles

Fits: K2, K5, K6 handles

Size: 1 7/16" x 1/4" x 1" Edge Fits: K1, K3, K17, K18, K30, K40 handles

Straight edge for trimming wood, plastic, paper and leather Size: 1 9/16" x 1/4" x1" Edge Fits: K1, K3, K17, K18, K30, K40 handles

Smooth teeth. For wood and plastic. Size: 1 3/4" x 1/4 x1/2" EdgeFits: K1, K3, K17, K18,K30, K40 handles

For general purposes; cutting, scoring and stenciling paper, wood, clay and wax.Fits: K1, K3, K17, K18,K30, K40 handles

For smooth cutting of wood, plastic, and foam in narrow areas. Size: 2 1/2" x 3/8" x2"Fits: K2, K5, K6 handles

Straight edge for trimming wood, plastic, paper and leather Size: 1 9/16" x 1/4" x1" Edge Fits: K1, K3, K17, K18, K30, K40 handles

Contains 13 assorted blades and one each K1, K2 and K5 knives.

With K5 handle and #30450, #30490 saw blades.

A Great set to keep your modelling going strong. Kit includes our Flex-I-File safety grip knife and three sets of replacement blades. Contents: Small Chisel, #11 Double Honed and Assorted Blade Pack.

These saws with great with #TZ3805 the Adjustable Jewelers Saw. Includes 144 Assorted Blades, 12 of each size 0/6, 0/5, 0/4, 0/3, 0/2, 0/1, 1, 2, 3, 4, 5, 6. Less than $0.14 each!

Makes perfect circle cuts, ideal for cutting masking materials. Will cut down to 1/16�?� / 1.5mm circles and as large as 2�?� / 50mm. Made with a titanium cutting blade for the best performance and product longevity.

12 pack circle cutter replacement blades (for FLX6116)

For use on plastics, ABS, resin casts and wood.  Approximately 7.5 inches long.Handmade in Japan exclusively for Flex-I-File.