GTR32059 1:32 GT Resin F-4B F-4N Phantom II Conversion Super Set (TAM kit)

GTR32059 is and updated rerelease of our 1/32 scale , F-4B/N Super Set. It contains all of the necessary parts to convert any 1/32 scale Tamiya F-4J kit into any F-4B/N variant. It contains the following:

Highly Detailed Resin Cockpit:
‹¨«?‹¨« Highly detailed tub with revised rear bulkhead and WSO crew station that installs as easily as the Tamiya Kit tub. A huge feature is the revised tub is made with no casting block to simplify installation with no messy casting block to remove!! Makes for an enjoyable virtually dust free installation.
‹¨«?‹¨« Highly detailed sidewalls which add missing details that stand out on the F-4B/N Jets.
‹¨«?‹¨« Two WSO top instrument panels and optional ‹¨«?‹¨«N‹¨«?‹¨« Knee panel allows every version form early B to late N to be configured as you choose.
‹¨«?‹¨« Highly detailed early USN HOTAS Throttle and control stick.
‹¨«?‹¨« Highly detailed landing gear and tail hook control levers.
‹¨«?‹¨« Highly detailed instrument panels for both crew stations.
‹¨«?‹¨« Highly detailed WSO left side radar control panel.
‹¨«?‹¨« Both Mk 5 and Mk 7 seats

Since the F-4B/N used the short exhaust nozzle, a set of our GTR32005 Exhaust Set is included as part of this kit.
‹¨«?‹¨« Wide engine trim needed with the short nozzle.
‹¨«?‹¨« Highly detailed afterburner tube and flame holder complete with fuel dump port.
‹¨«?‹¨« Designed to be installed at final assembly to simplify painting and finishing of your model.

F-4B/N Thin Wing Conversion:
‹¨«?‹¨« Top wing panel and bottom panel inserts to convert to the flat thin wing found on these jets.
‹¨«?‹¨« Thin wing Main wheel wells.
‹¨«?‹¨« Thin Main Gear tires with accurate Wheels.
‹¨«?‹¨« Thin wing spoiler section that transitions from the main gear to the Speedbrakes.
‹¨«?‹¨« Accurate early design speed brakes that have the correct interior details unique to the F-4B.
‹¨«?‹¨« Resin Nose gear wheels and tires with added details.
‹¨«?‹¨« Correctly shapped main gear doors in the scale thickness and correct unique to the F-4B.

Airframe Conversion includes:
‹¨«?‹¨« Three separate Tail fin cap styles allow modeling of all types used.
‹¨«?‹¨« New resin nose cone with 4 Chin pods used during the long period of service.
‹¨«?‹¨« ECM blisters to model any configuration of those sensors - they can vary from jet to jet.
‹¨«?‹¨« ECM blisters that were sometimes fitted above the air intakes.


Complete Instructions