Intakes-Exhausts

Finally, a simple solution to those ill-fitting Kinetic F-16 intakes that never seem to come out looking good. These highly detailed seamless intakes are the solution as they greatly enhance and simplify your build. Included is a new resin...

Finally, full intake conversion set for 1/48 scale Hasegawa F-16 kits. The set features MCID intake with both front and rear section, Detailed Fan face for GE engine, and detailed installation instructions. The set adds tremendous detail to the...

Full NSI intake set for the Hasegawa 1/48 scale F-16 series. As asked for by Modelers, finally a cost effective full intake set. Our set includes one piece seamless lower intake, rear intake tube above the wheel well, and detailed Pratt & Whitney...

Full seamless intake set for the Hasegawa 1/48 scale F-2 A & B kits. The set replaces the hard to assemble intake parts that require much seam filling and sanding with high quality seamless parts. The set includes seamless lower intake, rear intake...

For the HobbyBoss kit

Highly detailed 1/48 Intake-Engine Fan Set for the Kinetic A-6 and EA-6 kits. These intake give you the accurate look of the real aircraft with respect to the intake geometry and how the engine fits into the intake. The fan is positioned at...

GT Resin Seamless Intakes for 1/48 Kinetic F/A-18 A-D & CF-188A-D Legacy Hornet kits. Our unique, drop in fit seamless intakes replace the three part kit assembly that is impossibly difficult and time consuming to assemble, fill, and get a smooth...

Resin seamless Intakes for the Hasegawa F/A-18A,B,C,D 1/48 Scale Legacy Hornet Kits. Finally, drop in seamless intakes and fan faces for an easy, cost effective solution for detailing these otherwise excellent kits. Simply, Clean, paint and install...

Finally, a simple solution to those hard to finish intakes. These GT Resin F/A-18 E/F & EA-18G for the Hasegawa kits greatly simplify your build while giving you the true look of the real aircraft. Very easy to install, so that any modeler can...

Seamless intakes for the Hasegawa F/A-18 E/F and EA-18G kits. Simple, basic drop in installation. The intakes line up at the color demarkation line simplifying painting and duplicating the real intake panel line.

Full Seamless Intake Set for the Hasegawa British 1/48 FG.1 and FGR.2 ( F-4 K/M) Phantom kits. The set contains:‹¨«?‹¨« Full seamless intakes cast in white resin, ‹¨«?‹¨« Highly detailed splitter plates, ‹¨«?‹¨« Engine Pitot tubes, and ‹¨«?‹¨«...

Full Seamless Intake Set for the Hasegawa F-8 Crusader kits. The set contains:‹¨«?‹¨« Full seamless intakes cast in white resin, ‹¨«?‹¨« Accurate J57 Engine fan face ‹¨«?‹¨« Highly detailed front wheel well‹¨«?‹¨« Full directions for easy...

Full Seamless Intake Set for the Hasegawa A-7 Corsair II kits. The set contains:‹¨«?‹¨« Full seamless intakes cast in white resin, ‹¨«?‹¨« Accurate Engine fan face ‹¨«?‹¨« Highly detailed front wheel well‹¨«?‹¨« Full directions for easy...

Full Seamless Intake & Correction Set for the Hobby Boss A-7 Corsair II kits. The set contains:‹¨«?‹¨« Correctly profiled Engine air intake‹¨«?‹¨« Full seamless intake cast in white resin, ‹¨«?‹¨« Accurate Engine fan face ‹¨«?‹¨« Highly...

Finally, Full Seamless Intakes for 1/48 Hobby Boss F/A-18 A-D Legacy Hornet kits. As modelers know, the HB line of Legacy Hornets lacks full length intakes. GT Resinƒ??s Seamless intake solves this Intake issue for an otherwise excellent kit. Also...

Seamless intake set for the Revell 1/48 Scale F-15E Strike Eagle kit. Set is a drop in replacement for the kit parts with only minor work to the lower fuselage required to eliminate all intake seams. Set comes with right and left intakes,...

One piece seamless intakes for the new Meng 1/48 F/A-18E Super Hornet kit. The set contains right and left seem less intakes cast in white resin, and two engine fan diffusers, used to hide the fan face from radar. The set is a drop in installation with...

GT Resin's latest product is seamless intakes for the new tool Hobby Boss F/A-18 E/F Super Hornet and EA-18G Growler kits in 1/48 scale. The intakes are a drop-in installation saving hours of filling and sanding, and with no casting blocks to remove...

Seamless Resin Intakes for the Great Wall Hobby 1/48 Scale SU-30SM kit. These intakes are designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install replacement.

SEAMLESS Intake Ducts for “NEW Line of TAMIYA F-4 Phantom kits.”These are designed to be a drop in fit replacing the kit parts eliminating the need to fill and sand the intakes to remove the assembly seam. These are cast in an off-white...

• Highly detailed inner and outer splitter plates replicating that of the real aircraft• Highly detailed J-79 fans. One set of USN and one set of USAF with Cartridge Starter fan faces• Seamless on price intakes replicating the ZM part but...

>>>>> GTR48052 F-15 Corrected Intake Set for Great Wall Hobby Kits Correctly shipped and highly detailed intake/fan set for the Great Wall 1/48 F-15 kits. The set will fit all and future kit releases and is a drop-in design so any skill...

>>>> GTR48053 F-14 Basic Intakes for Tamiya 1/48 F-14 Kits • Simple to install seamless intakes for the fantastic Tamiya F-14A & D Kits

Seamless Resin Intakes for the Great Wall Hobby 1/48 Scale SU-27 kits. These intakes fit both the single seat and two seat kits. Designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install replacement.

Seamless Resin Intakes for the Great Wall Hobby 1/48 Scale SU-35kit. These intakes are designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install replacement.

Seamless Resin Intakes for the fantastic Mini Base 1/48 Scale SU-27K kit. These intakes are designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install replacement.

Seamless Resin Intakes for the fantastic Mini Base 1/48 Scale SU-33 kit. These intakes are designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install replacement.

  One piece to fit the new F-4E and F-4G Phantom kits from Meng. These drop in fit of the kit part assembly and save hours of filling and painting of the kit parts. The Intakes are cast in White resin so no painting is necessary, or they can be...

1/32 Aichi D3A1 Val Big Pack, detail sets for Infinity Models kit. The Aichi D3A Type 99 (Allied name "Val") is a World War II carrier dive bomber. It was the main dive bomber of the IIJN and was involved in almost all IJN actions, including the attack...

  For the Tamiya kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

  For the Tamiya kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Academy kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the MiniBase kit Includes: - Nose landing gear- Main landing gear- Exhaust nozzles- Wing-fold- Nose wheel FOD guard- K-36D Ejection Seat Harness- Seated Pilot

For the MiniBase kit Includes: - Nose landing gear- Main landing gear- Exhaust nozzles- Wing-fold- Nose wheel FOD guard

For the Meng kit

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

* For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

For the Eduard kit

For the Revell kit

For the Revell kit

For the Revell kit

For the Trumpeter kit

For the Trumpeter kit

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

For the Tamiya kit

For the Hasegawa kit

For the Trumpeter kit

For the Trumpeter kit

For the Tamiya kit

For the Trumpeter kit

For the Trumpeter kit

For the HobbyBoss kit

For the Trumpeter kit

For the Revell kit

For the Revell kit

For the Trumpeter kit

For the Trumpeter kit

For the Trumpeter kit

For the Tamiya kit

For the Revell kit

For the Revell kit

For the Hasegawa kit

For the Trumpeter kit

For the Revell kit

For the Revell kit

For the Hasegawa kit

For the Trumpeter kit

For the Kitty Hawk kit

For the Revell kit

For the Revell kit

For the Hasegawa kit

For the ICM kit

For the Revell kit

For the ICM kit

For the Revell kit

For the Tamiya kit

For the Tamiya kit

For the Tamiya kit

For the ICM kit

For the ICM kit

For the ICM kit

For the Revell kit

For the ICM kit

For the ICM kit

For the ICM kit

For the IBG kit

For the Hasegawa kit

For the Hasegawa kit