1:48 Scale - Post WW2 - US

OverviewSkill Level: 5Scale: 1/48Length: 23.46” Width: 16.57” Height: 4.54” Parts: 170 DescriptionThe Most Spectacular aircraft in the world today is, without doubt, the SR-71® Blackbird®. Holder of the world absolute speed and...

Includes markings for: Grumman JOV-1A Mohawk, s/n 60-3736, 225th Aviation Company, "Phantom Hawks", flown by Capt. Mike Langer, Vietnam, December 1964. Grumman OV-1A Mohawk, s/n 59-2617, 23rd Special Warfare Aviation Detachment, Vietnam, 1963. Grumman...

Marking options: - L-19/O-1E Bird Dog, (56-2661), US Army service, Alaska,1966. - L-19/O-1E Bird Dog, (57-6273), Forward Air Controller (FAC) at Lai Khe supporting the 3rd Bde, 1st ID, c. 1966-1967. - L-19/O-1A Bird Dog, (119732), of ? 10...

Includes markings for: Grumman OV-1D Mohawk, s/n 69-17008, 2nd Military Intelligence Battalion, Desert Storm Operation, based at Al Qaysumah, Saudi Arabia, 1991. Grumman OV-1D Mohawk, s/n 68-15938, 73rd Combat Intelligence Company, based at Stuttgart,...

Includes recessed panel lines, highly detailed side-by-side dual cockpit, multipart canopy and external stores (2 each 7 and 19 round 2.75" rocket launcher pods and 2 drop tanks). Features long wings, overwing flare dispensers and LS-59 strobe pods...

Cold War era piston-engined military trainer aircraft, 'A' variant converted to Nomad 'D' for the counter insurgency (CION) operations. Kit features engraved panel lines, well appointed tandem cockpits, multipart radial engine, separate rudder and...

Cold War era piston-engined military trainer aircraft, carrier-capable US Navy 'C' variant. Kit features engraved panel lines, well appointed tandem cockpits, multipart radial engine, separate rudder and ailerons, detailed tricycle landing gear and wheel...

Experience the ultimate in modeling fun with the 1:48 scale Do 217J-1/2! Dive into the world of model building and discover the impressive 1:48 scale Do 217J-1/2 aircraft! With 200 parts, this kit offers an exciting and challenging project for...

The O-2A is a twin-engine military plane. The versatility of the O-2A gave it capabilities that were normally reserved for larger and more expensive aircraft which were not designed primarily as observer planes. The complete designation of the standard...

Conquer the skies with the authentic B-26 Invader model kit - perfection in detail for passionate modelers! Dive into the fascinating world of model building with our detailed B-26 Invader model kit. At 1:48 scale, this model is an accurate recreation...

 

The F-86D was a further development of the legendary Sabre and is distinguished by the huge radome above the jet intake. This radome houses a computerised fire control system that was revolutionary at the time. Very detailed kit External...

A model construction kit of Maverick's F/A-18E Super Hornet from the film "Top Gun: Maverick", in which Pete "Maverick" Mitchell who has now become a legend, passes his extraordinary flying skills on to the new Top Gun generation. Detailed surfaces...

Even more than 20 years after its decommissioning and almost 60 years after its first flight, myths still surround the SR-71 Blackbird. What is certain, however, is that the spy plane developed at Lockheed's legendary Skunk Works on behalf of the CIA...

Features recessed panel lines, 2 types injection-molded canopies, resin parts (cockpit tub, wheels, and additional details), photo-etch parts (instrument panel, seatbelts, rudder pedals, control yokes and oleo scissors) plus film instruments. Decals...

Features detailed crisp surface detail, full cockpit/forward fuselage interior, separately molded fuselage doors, injection-molded clear parts, white metal rotor hubs, resin parts (including finely cast multipart rotorhead) and photo-etch parts...

During the 1950s, the AF-2 Guardian anti-submarine aircraft were operating from the US Navy carriers in so-called Hunter-Killer pairs which consisted of one machine of the AF-2W version performing the Hunter role using its volumous, belly-mounted...

The largest single engine, piston engine aircraft to have ever been flown from the decks of aircraft carriers – yes this is the apt description of the anti-submarine AF-2 Guardian aeroplane. Following the Korea War, the Guardians were...

The 1/48 T-2 Buckeye model is back now as is also its larger 1/32 cousin. And both releases share the same colour schemes depicting so called anniversary markings, one scheme is for a US Navy option while the other is more exotic indeed, reminding us...

The US Marines, US Army, RAAF and the Royal Netherlands East Indies Army Air Force (ML-KNIL), these are the operators we have picked for our new release of the L-4 Grashopper kit. The US Marines machine sported blue over grey scheme, while the other...

Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. Sleek fuselage including aerodynamic blended wing body design accurately reproduced. Accurately curved bubble top canopy can be assembled in the opened or closed position. ...

About the Model Model represents the F-16C [Block 25/32]. New parts accurately reproduce the correct engine nozzle and smaller air intake that correspond to Pratt & Whitney powered F-16s. Main landing gear and gear well covers also depicted with...

Since 1975, the U.S. Air Force has been holding large scale training exercises called Red Flag at Nellis Air Force Base in Nevada. These exercises pit a Blue Force against an opposing Red Force which has "Aggressor" units equipped with F-16C Block...

The Grumman F-14 Tomcat is a supersonic, twin-engine, two-seat, variable-sweep wing fighter aircraft. The Tomcat was developed for the United States Navy's Naval Fighter Experimental (VFX) program following the collapse of the F-111B project. The...

This ALL-NEW 1/48 scale model aircraft series kit recreates the Phantom II, which depicts the F-4B variant. The Phantom II first entered service in 1961, and offered excellent adaptability to a range of purposes. F-4Bs were the first Phantom II...

This model kit recreates the Grumman F-14A Tomcat. The F-14A Tomcat U.S. Navy Fighter is famous for being the first mass-production and the most-produced model among the F-14 series. This kit realistically depicts the F-14A Tomcat (Late Model) - in...

The most technologically advanced modern fighter on the planet is finally available in our legendary 1/48 Aircraft Series. Thanks to extensive research, the A variant of the Lockheed Martin F-35 Lightning II comes to modelers workbenches. The F-35 -...

This model kit recreates the F-35 Lightning II variant, F-35B in our legendary 1/48 Aircraft Series. Developed under the Joint Strike Fighter (JSF) program , the F-35 integrates multiple functions into its design and there are three types: the F-35A...

Markings included for: RVAH-5 USS America (CVA-66) RVAH-6 USS Nimitz (CVN-68).

The Thunderbirds were activated in 1953, and the F-100D Thunderbirds were a part of the USAF Air Demonstration Squadron, which was activated on February 13, 1967. By the end of the 1960?s, the Thunderbirds had flown in over 1000 air shows nationwide. Kit...

Kit consists of 124 parts on 4 sprues, and the completed kit measures 9 1/2" long with a wingspan of 9 1/2". Developed post-WWII, the Panther became a mainstay of US Navy and Marine forces in Korea. They were the first carrier jets to fly in combat,...

Kit consists of 124 parts on 4 sprues, and the completed kit measures 9 1/2" long with a wingspan of 9 ?‹¨« inches. The "P" variant was an unarmed photographic reconnaissance version used in Korea in the 1950's. Developed post-WWII, the Panther became a...

The F9F-3 was powered by an all new 4600 lb Allison J-33 engine. Kit consists of 124 parts on 4 sprues plus a photo etch part and a film instrument panel. Markings are for US Navy VF-51 in Korea. Completed kit measures about 9 ‹¨«" long with a wingspan...

The F100 served in the USAF from 1954 until 1971. It was originally designed as a higher performance follow-up to the F-86 Sabre. Adapted as a fighter bomber, the F-100 would be supplanted by the F-105 Thunderchief for strike missions over North Vietnam...

The definitive F-100D was developed to improve the combat capability of the F-100C by being primarily a ground attack aircraft with secondary fighter capability. It was fitted with autopilot, upgraded avionics and Sidewinder capability. Kit consists of...

This is the first of its kind in an injection molded plastic in any scale! After the single-seat, supersonic F-100 fighter entered service in 1954, it developed a high accident rate, in part due to pilot inexperience with the new aircraft. So a...

The Douglas A-3�?Skywarrior��was a strategic nuclear bomber developed for the US Navy. The aircraft had a largely conventional semi-monocoque fuselage, with two J57 turbojet engines in underwing nacelles, A-3's wings can be folded for storage below deck,...

This variant of the Skywarrior was the bomber-trainer version with an updated cockpit for an extra crew member. The bombardier crew position was relocated to the cabin, and the periscope fairing was located farther back. Since it did not have a bomb bay,...

Following up the very successful first release of the Talon, Trumpeter introduces the �?C�� variant, which features the addition of a GPS, INS (Inertial Navigation System), and a traffic collision avoidance system as well as PMP (a propulsion...

Following up the hugely successful ??®??A??®???® variant, the ??®??B??®???® version was a two-seat, combat-capable training version. Pilot and instructor were seated in tandem. The fuselage was reconfigured creating a lighter aircraft. Weapons...

New tooling kit for 1/48 T-38A Talon 'USAF' Total 100 plastic parts and decal Detailed cockpit and wheel bay details, Decal printed by Cartograf, Italy 5 A/C markings for USAF A4 book...

New tooling kit for 1/48 T-38A Talon 'NASA' Total 100 plastic parts, 2 resin parts and decal Detailed cockpit and wheel bay details, Early type main wheels by resin parts, Decal printed ...

Premium Edition kit for 1/48 T-38A Talon 'Holloman AFB' (Limited Edition) Total 100 plastic parts included Resin parts, Metel part, PE and decal Ejection seats by resin parts, PE part for ...

New tooling kit for 1/48 T-38C Talon 'USAF' Total 120 plastic partsincluded PE and decal New cockpit parts included instrument panels and Glareshield with HUD, Intake parts and nozzle...

New tooling kit for 1/48 AT-38B Talon 'LIFT Trainer' Total 110 plastic parts included PE and decal Front Glare shiedl and Early type main wheel parts for AT-38B, Decal printed by Cartograf, Italy 3 A/C markings for USAF A4 book manual...

New tooling kit for 1/48 T-38A Talon 'The White Rocket' Total 100 plastic parts included Decal and Masking seal Decal printed by Cartograf, Italy 3 A/C markings for the Northrop Company, NASA and USAF A4 book manual included

- New tooling kit for 1/48 T-38C Talon 'Heritage Schemes'- Total 140 plastic partsincluded Color Printing PE and decal- New cockpit parts included instrument panels and Glareshield with HUD,- New sprue paets for the Martin Baker US16T Ejection seats,-...

1/48 T-45C Goshawk Sprue parts by Kinetic Models, Color printed PE part and Sagged Wheels by Resin parts Canopy masking seal included 2 A/C markings for US Navy Decal...

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

The 3rd SWS F-4J kit, going back to the Navy with VF-142 Ghostriders markings! Since its first flight in 1958, the F-4 has won many battles across the battlefields of the Vietnam and Gulf war, widely operated over a long span of time all over the...

This F-4 belonged to the VF-161 "Chargers" unit on the F-4S Midway carrier. Also assigned to Atsugi Base in Japan, the aircraft is familiar also to F-4 fans.The particularity of the S-type is "the front edge slats on inner/outer wings" as seen in the...

F-4 fans, pay attention to these 8 differences between a F-4D and a F-4C:‹¨«?‹¨«INNER STRUCTURE 1. FCS changes from AN/APQ-100 to -109. 2. INS, from AN/ASN-48 to -63. 3. Bomb computer AN/ASQ-91 and AN/ASG-22 sight installed.‹¨«?‹¨«EXTERIOR SHAPE...

There is nothing like the joy of comprehensively exploring the F-4 series with SWS kits. For the long-nose versions, SWS has selected to recreate seven types: E (early and late production), EJ/EJ-Kai, F/F ICE, and G. All subjects are extensively...

  Size: Height approx. 106 mm, Width approx. 245 mm, Length approx. 401 mm Number of Parts: 490

Specifications- Plastic Model Kit- Including 2-color molded parts (grey and clear) Total Parts- 509 Size- Height: approx. 105 mm, Width: approx. 245 mm, Length: approx. 401 mm Manufacturer- ZOUKEI-MURA   Features of SWS 1/48 F-4G Wild Weasel V The...