BarracudaCals

This set contains one set of accurate and detailed 3D printed US Navy style slotted rudder pedals. Adds a nice little detail accent to compliment your model's instrument panel. A simple drop fit...

This set contains one set of accurate and detailed 3D printed USAF style solid rudder pedals. Adds a nice little detail accent to compliment your model's instrument panel. A simple drop fit...

Contains a pair of detailed 3D printed 20mm Colt cannon barrels with muzzle brakes compete with accurately placed and sized vent holes. Barrels are deeply drilled out. For most A-4C and later...

This new set contains a correctly shaped de-Havilland spinner, superdetailed radiator with standard & dust filtered carburettor intake and hollowed exhausts. An easy, straightforward and highly...

This set contains a complete set of 3D printed replacement parts for the Airfix Lightning's landing gear. The parts consist of new super detailed main and nose gear legs printed in a tough resin,...

This set contains a pair of accurate resin mainwheels with smooth tires (seen increasingly on Fw 190s in the last year of the war), solid wheel hubs and detailed tire logo and data. For all late war...

This set contains a pair of accurate resin mainwheels with ribbed tires (seen on all 190s until the last few months of the war), solid wheel hubs and detailed tire logo and data. For all later Fw...

This set consists of accurate and detailed 3D printed de Havilland and Rotol spinners to replace the inaccurate Airfix kit spinners. The kit Rotol spinner is far too long, and the de Havilland...

This set is designed for the 1/48 scale Airfix Canberra PR. 9 and provides precut masks for the main canopy and all of the other transparencies in the kit. This includes a few that Airfix missed,...

Use this mask to paint the dielectric panel on the spine of the Airfix 1/48 E.E. Lighting. You can use this mask it two ways. You can either paint the panel first and mask it with the positive mask,...

Contains all the (mostly 3D printed) parts to convert the A-4E/F into a RNZAF Kahu. Cockpit upgrades include a new, modern instrument panel with multi function displays and instrument decals, a new...

Contains a new, accurate engine compressor face clearly visible through the kit intakes and new engine rear. The kit part does not capture the look well. Also included are a new turbine face and...

The Aero 1D 300 gallon tanks were widely used, and were carried in this configuration by all variants of the Skyhawk as well as the F4D Skyray. This set consists of a pair of highly accurate and...

Contains 4 pairs of accurate and detailed 3D printed aileron mass balances. Balances are cast in a strong resin to reduce the chances of breakage. They require much less cleanup and have detail that...

  This decal set consists of one complete set of external stencils in the early style serifed font. This includes alternate wing walk markings, gun port patches, Dunlop wheel logos, bomb...

This set contains highly accurate and detailed replacement resin parts for the cockpit door, gunsight, stick, throttle and retract quadrants, seat with molded-in belts, and other detail parts. Also...

This set contains a pair of accurate resin wheels featuring super detailed covered hubs and tires with logo and data. Most kits don't give you the covered option, yet they were seen quite a bit on...

This set consists of a pair of accurate resin wheels featuring super detailed hubs and treaded Z-Block tires with logo and data. These wheels were often fitted to Australian Spitfires, but were also...

This set contains a pair of accurate resin wheels featuring super detailed hubs and tires with logo and data. Most kit 5 slot wheels are not very well done. A very noticeable upgrade for Eduard,...

This set consists of a super detailed, resin cast “raised cockpit” Corsair seat with molded-in American style harness & stitching decals. The harness is naturally draped and has...

This set consists of a pair of accurately shaped, thin, distortion free, vacform sliding hoods to model an open canopy for your Spitfires. If you want to display your Spitfire with the canopy slid...

This set contains a pair of accurate resin wheels featuring super detailed covered hubs and tires with logo and data. Most kits don't give you the covered option, yet they were seen quite a bit on...

This set consists of a pair of accurate resin wheels featuring super detailed hubs and treaded Z-Block tires with logo and data. These wheels were often fitted to Australian Spitfires, but were also...

This set contains a pair of accurate resin wheels featuring super detailed hubs and tires with logo and data. Most kit 5 slot wheels are not very well done. A very noticeable upgrade for Airfix,...

This set consists of a pair of accurate resin wheels with and super detailed block tread tyres and 4-slot hubs complete with uplocks. The Sea Fury had the same wheel as the Tempest, Firefly, Hornet...

This set consists of a pair of accurate resin wheels with and super detailed diamond tread tyres and 4-slot hubs complete with uplocks. The Sea Fury had the same wheel as the Tempest, Firefly,...

This decal set consists of one complete set of external stencils in the early style serifed font. This includes alternate wing walk markings, gun port patches, Dunlop wheel logos, bomb markings, door...

  Contains a new cockpit floor and rear bulkhead, featuring a super detailed seat with accurate and naturally draped molded-in seat belts. If you struggle with bending and gluing down etched...

  Contains a new cockpit rear bulkhead, featuring a super detailed seat with accurate and naturally draped molded-in seat belts. If you struggle with bending and gluing down etched seatbelts,...

  The beautiful Tamiya G-6 has one main problem: it's seriously limited in the number of schemes it can be built with due to a lack of alternate parts. This set supplies you with a tall fin and...

  This set contains a new resin horizontal stabilizer w separate elevators. Most 109Gs have elevators hanging in the down position when parked, unless control locks were fitted. Directly...

Contains 4 sets of resin cast aileron mass balances (or 3 sets and a couple of spares) to replace lost, broken kit or crude parts. Can be fitted to any 1/32nd kit of the Bf 109F, G or K. Simple...

This set consists of a new resin standard Bf 109G tailwheel strut with molded in leather boot and detailed tailwheel to replace the uncovered Revell Bf-109G standard tailwheel strut. A simple plug...

Contains new resin lower engine cowling with an accurate early style carburettor intake to allow you to build the earlier Spitfire IXs from the Revell kit. The early intake is not included in the...

  This set consists of a decal sheet that gives you all the small stencils and placards typically found in Bf 109G cockpits. It also includes a beautifully detailed resin instrument casting...

This set contains one accurately shaped, crystal clear, vacform sliding blown hood to replace the kit part in all Eduard Fw 190 kits. Will fit most other kits, too. Why do you need them? Eduard's...

This set contains one accurately shaped, crystal clear, distortion free, vacform sliding standard hood to replace the kit part in all Eduard Fw 190 kits. Will fit most other kits, too. Why do you...

The set consists of new resin ailerons, elevators and standard rudder for the Revell kit. Why did we make them? The kit parts have nice fabric rib tape detail, but it is overstated and the trailing...

Contains a new resin lower engine cowling w accurate, detailed, late style Aerovee carburetor intake to improve the simplified, inaccurate Revell Spitfire Mk IX parts. A quick and easy one-piece...

This set contains a pair of new resin wing sections featuring accurate intake & exhaust ramps to replace the flat wing sections in the kit. Also included are new detailed radiator fairings and...

This set consists of one detailed, accurate upper cowling specific to the Erla built 109G-5 and G-6 aircraft. The gun troughs are different on these Erla built machines. Erla upper cowlings have a...

This set consists of one detailed, accurate upper cowling. This set improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell’s Bf 109G-6...

This set consists of a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed covered 5-slot wheel hubs. The covered hubs were used to keep...

This set contains a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed 5-slot wheel hubs. Designed to replace the rubber tire/plastic...

This set contains a pair of accurate resin mainwheels featuring super detailed spoked hubs, subtly ribbed tires and readable logo and data as fitted to the Bf 109E and F series aircraft. Replace...

This set contains a pair of resin cast accurate mainwheels, featuring fine tire beading, readable tire data, and a super detailed wheel hubs with separate uplock lugs. Designed to replace the...

This set consists of 4 detailed resin wheels for the Irving Napier land speed car that set a record of 231 mph in 1929. The Profil24 kit, which these are designed for, has wheel castings that...

These decals date back to the Cooper Details days and a never completed 1/48 Welkin project. While the kit never materialized, we do have the decals. These decals may be used to replace the kit...

P-51D-20-NA Mustang ‹¨«‹¨«‹¨«Double Trouble Two‹¨«‹¨«‹¨« 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel ‹¨«‹¨«‹¨«Wild‹¨«‹¨«‹¨« Bill Bailey. Raydon Airfield,...

Markings options for: ?Schmaltzie? P-47D-30-RE, serial number 44-20866 57th FG, 65th FS, 12th Air Force. Flown by Lt. F.J. Middleton. Based in Southern Italy, Summer, 1944. Weathered, dusty natural...

"Kansas Tornado II" P-47D-25-RE, serial number 42-26742. 510th FS, 405 FG, 9th Air Force. Flown by Capt. Howard Curran. Based at St. Dizier, France, Fall, 1944. Natural metal finish with dark blue...

"Boise Bee" P-47D-1-RE, serial number 42-7890. 334th FS, 4th FG, 8th Air Force. Flown by Lt. Duane Beeson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note...

P-51D-20-NA Mustang ?Double Trouble Two? 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel ?Wild? Bill Bailey. Raydon Airfield, England,1944-45. P-51D-15-NA Mustang ?The...

Markings options:Curtiss P-40K Warhawk ?White 13? 64th FS/57th FG. Flown by 1st Lieutenant Robert Johnson ?Jay? OvercashBased at Hadi Main, Tunisia. May, 1943.Overcash final score was 5...

"Boise Bee" P-47D-1-RE, serial number 42-7890. 334th FS, 4th FG, 8th Air Force. Flown by Lt. Duane Beeson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note...

P-51D-20-NA Mustang ?Double Trouble Two? 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel ?Wild? Bill Bailey. Raydon Airfield, England,1944-45. P-51D-15-NA Mustang ?The...

Markings options:Curtiss P-40K Warhawk ?White 13? 64th FS/57th FG. Flown by 1st Lieutenant Robert Johnson ?Jay? OvercashBased at Hadi Main, Tunisia. May, 1943.Overcash final score was 5...

Markings options for: ?Boise Bee? P-47D-1-RE, serial number 42-7890. 334th FS, 4th FG, 8th Air Force. Flown by Lt. Duane Beeson. Based at Debden, England, January, 1944. Finished in Olive Drab and...

?Angie? P-47D-27-RE, serial number 42-26860 512th FS, 406th FG, 9th Air Force. Flown by Col. Anthony Grosetta. Based at Asch, Belgium, early 1945. Natural metal with yellow trim and Polished OD...

This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire beading & data. The tyre is smooth; by far the most common tire seen on Spitfires. For Mk VII thru 21...

This set consists of a pair of super detailed, accurate resin main wheels with smooth tires as fitted to Hawker Tempest V, Series II and later variants, such as the MK II and Mk VI when operating...