Exterior Sets

For the Special Hobby kit

For the Airfix kit

For the Airfix kit

For the Airfix kit

For the Eduard kit

For the Academy kit

For the Special Hobby kit

For the Special Hobby kit

For the Airfix kit

Self Adhesive Made out very thin metal (thinner than standard photo-etch) and clearly shows rivet and panel line details. NOTE - These stiffeners look better in person than the picture is able to show. Also, they are actually metallic in...

F/A-18F/F Super Hornet Folding wing set for Academy 1/72 kit Total 12 Resin parts.

Brassin set for MiG-15bis contains 2 airbrakes and 2 rods in 1/72 scale. Set also contains photo-etched details for airbrakes bays.

Brassin set for MiG-15 contains 2 airbrakes and 2 rods in 1/72 scale. Set also contains photo-etched details for airbrakes bays.

Brassin set of F-16 airbrakes for Tamiya kit in 72nd scale. Set contains: resin: 2 parts decals: no photo-etched details: no painting mask: no

Brassin set of Fw 190A propeller in 72nd scale for kit by Eduard. The tool to install the propeller blades included. Set contains: resin: 8 parts decals: no photo-etched details: yes painting mask: no

Brassin set of early top cowl for Spitfire Mk.IX in 72nd scale by Eduard. Set contains: resin: 1 part decals: no photo-etched details: no painting mask: no

Brassin set of late top cowl for Spitfire Mk.IX in 72nd scale by Eduard. Set contains: resin: 1 part decals: no photo-etched details: no painting mask: no

Brassin set ‹¨«?? the upper cowling for Spitfire Mk.VIII molded in one piece in 1/72 scale. Set contains: resin: 1 part decals: no photo-etched details: no painting mask: no

Brassin set - turbochargers for B-24 Liberator bomber in 1/72 scale. Recommended kit: Eduard / Hasegawa Easy to build, replaces plastic parts. Set contains: resin: 4 parts decals: no photo-etched details: no

Brassin set - airbrakes for MiG-21MF in 1/72 scale. Recommended kit: Eduard Set consists of two front and one rear air brakes. Set contains: resin: 6 parts decals: no photo-etched details: no painting mask: no

Brassin set the propeller for Bf 109F in 1/72 scale.The spinner could be removed.Made by direct 3D printing. Recommended kit: EduardSet contains: 3D print: 6 parts decals: no photo-etched details: no painting mask: no  

Brassin set the propeller for Bf 109F in 1/72 scale.The spinner could be removed.Made by direct 3D printing. Recommended kit: EduardSet contains: 3D print: 6 parts decals: no photo-etched details: no painting mask: no  

Brassin set wing balance weights for Bf 109F in 1/72 scale.The set consists of 10 balance weights.  Easy to assemble, replaces plastic parts.Made by direct 3D printing.Recommended kit: Eduard Set contains: 3D print: 10 parts decals: no...

Brassin set aibrakes for MiG-29 in 1/72 scale.Made by direct 3D printing.Recommended kit: Great Wall Hobby Set contains: 3D print: 3 parts decals: no photo-etched details: no painting mask: no       This is an accessory for a...

Brassin set propeller for Bf 109G in 1/72 scale.The spinner could be removed.Easy to assemble, replaces plastic parts.Made by direct 3D printing.Recommended kit: Eduard Set contains: 3D print: 2 parts resin: 4 parts decals: no photo-etched...

Brassin set propeller for P-51D in 1/72 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Eduard Set contains: 3D print: 3 parts resin: 4 parts decals: no photo-etched details: no painting mask: no  ...

Brassin set propeller for P-51D in 1/72 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Eduard Set contains: 3D print: 3 parts resin: 4 parts decals: no photo-etched details: no painting mask: no  ...

Brassin set a deployed parachute for F-4E in 1/72 scale.Made by direct 3D printing.Recommended kit: Fine Molds Set contains: 3D print: 5 parts decals: no photo-etched details: yes painting mask: no   This is an accessory for a plastic model...

Brassin set propeller for Bf 109G-10 or Bf 109K-4 in 1/72 scale.Easy to assemble, replaces plastic parts.Recommended kit: Eduard Set contains: 3D print: 2 parts resin: 4 parts decals: no photo-etched details: no painting mask: no   This is...

Brassin set propellers, air intakes and an undercarriage for L-410UVP in 1/72 scale.Made by direct 3D printing.  Easy to assemble, replaces plastic parts.Recommended kit: Gavia / Eduard Set contains: 3D print: 10 parts resin: 9 parts decals:...

Collection of 3 sets for Bf 109G-2 in 1/72 scale.Recommended kit: Eduard LööK set (pre-painted Brassin dashboard & Steelbelts) gun barrels propeller   This is an accessory for a plastic model kit. Assembly and painting required...

Collection of 3 sets for Bf 109G-4 in 1/72 scale.Recommended kit: Eduard LööK set (pre-painted Brassin dashboard & Steelbelts) gun barrels propeller     This is an accessory for a plastic model kit. Assembly and painting...

Collection of 4 sets for Bf 109G-6 in 1/72 scale.Recommended kit: Eduard LööK set (pre-painted Brassin dashboard & Steelbelts) gun barrels exhaust stacks undercarriage wheels   This is an accessory for a plastic model kit. Assembly...

Collection of 4 sets for Bf 109F in 1/72 scale.Recommended kit: Eduard LööK set (pre-painted Brassin dashboard & Steelbelts) gun barrels exhaust stacks undercarriage wheels   This is an accessory for a plastic model kit. Assembly...

Collection of 3 sets for Bf 109G-10 in 1/72 scale.Recommended kit: Eduard LööK set (pre-painted Brassin dashboard & Steelbelts) propeller undercarriage wheels   This is an accessory for a plastic model kit. Assembly and painting...

Collection of 4 sets for Bf 109G-14/AS in 1/72 scale.Recommended kit: Eduard LööK set (pre-painted Brassin dashboard & Steelbelts) gun barrels undercarriage wheels exhaust stacks   This is an accessory for a plastic model kit...

  This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

Collection of 4 Brassin sets for B-17G in 1/72 scale by Airfix. wheels engine guns turbochargers

Collection of 6 Brassin sets for Spitfire Mk.VIII in 1/72 scale by Eduard. gun bays exhaust stacks - fishtail top cowl cockpit radiator fairings PE landing flaps

Collection of  6 sets for Bf 109G-6 in 1/72 scale.Recommended kit: Eduard cockpit engine undercarrigae legs BRONZE propeller undercarriage wheels radio compartment   This is an accessory for a plastic model kit. Assembly and painting...

Collection of 3 sets for P-51D-5 in 1/72 scale.Recommended kit: Eduard cockpit propeller wing gun bays   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This...

Collection of 3 sets for P-51D-10 in 1/72 scale.Recommended kit: Eduard cockpit propeller wing gun bays   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This...

Collection of 3 sets for P-51D-15+  in 1/72 scale. Recommended kit: Eduard cockpit propeller wing gun bays   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately...

Collection of  4 sets for Bf 109G-10 manufactured by Wiener Neustädter Flugzeugwerke in 1/72 scale.Recommended kit: Eduard engine cockpit undercarriage wheels propeller   This is an accessory for a plastic model kit. Assembly and...

Collection of  4 sets for Bf 109G-10 manufactured by Messerschmitt factory in Regensburg in 1/72 scale.Recommended kit: Eduard engine cockpit undercarriage wheels propeller   This is an accessory for a plastic model kit. Assembly and...

Collection of  4 sets for Bf 109G-10 manufactured by Erla factory in Leipzig in 1/72 scale.Recommended kit: Eduard engine cockpit undercarriage wheels propeller   This is an accessory for a plastic model kit. Assembly and painting required...

This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

R-7200B Black Aero Rigging Super Fine (1/72) 45m Made of lycra - only material and rigging material made for 1/72 scale Aero model (easy and quick to use). Diameter 0.055mm x 45m (145ft) Suitable for 1/72 scale Aero model

The set includes turned brass Pitot Tube and Angle Of Attack probes. Fit to all models in 1:72 scale. It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives.

Used on German nightfighters (e.g. Bf 110, Ju 88). The set includes five complete turned brass aerials Assembly instruction: 1. Cut off or replace the original plastic radar parts. 2. Put together aerial metal parts. We advise soldering to join metal...

Used in every NATO aircraft with air-to-air refueling system The set includes turned aluminum part. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic part and drill a hole in the remaining...

The set includes turned brass Pitot Tube. Fit to all 1:72 scale models of Panavia Tornado It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives.

The set includes turned brass Pitot Tube. Fit to all 1:72 scale models of BAe Hawk T.1 It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives.

He-162 Salamander - armament and detail set (MG 151 barrel tips, nose gear indicator and Pitot Tube)

Me-163A Komet - armament set (MG 151 barrel tips) & Pitot Tube

F-14 A early version - nose tip & Angle Of Attack probe

For short nose version F-4 Phantoms (F-4B F-4C F-4D F-4J F-4N F-4S)Includes pitot tube, ram air inlet and AOA probe.

For long nose version F-4 Phantoms (F-4E F-4F F-4G F-4EJ RF-4B RF-4C RF-4E RF-4EJ)Includes pitot tube, ram air inlet and AOA probe.

SEPECAT Jaguar GR1/GR3 Pitot Tube & Angle Of Attack probe

MiG-23 (Flogger) - Pitot Tube (all variants except MLD version)

MiG-23 MLD (Flogger K) - Pitot Tube

The set includes turned brass Pitot Tube and Angle Of Attack probe.Insert the metal parts using Cyanoacrylate adhesives. Drill proper hole in plastic part if needed.