Armor

Item No 01505 Item Name Canadian AVGP Grizzly (Late) Scale 1:35 Item Type Static Kit Model Brief Length: 181.5mmWidth: 88.2mm Total Parts 220+ Photo Etched Parts...

This variant of the Sdkfz 7 includes a newly tooled mud guard and canvas-type cover for cargo transport. Kit consists of 758 parts on 16 sprues plus 3 rubber tires, photo etched foot board, flange, upper/lower steps and tow cables, plus markings in dark...

An integral part of the WWII BP-42 armored train, the Panzertragerwagen enabled the German Army to move tanks and other military equipment across the battlefield at high speeds and under armed protection. Also included is a 1/35 PzKpfw 38(t) E/F German...

The cannon armed car of the BP42 (Series 42) armored train was armed with either a Russian M 02/30 (L/30 barrel) which was designated the 7.62cm 295/1( r) field cannon or the captured 10cm Polish (Skoda) F.H. 14/19 ( p). It was placed within an armored...

Armored trains transported not only equipment and supplies, but also troops. The German Kommandowagen was one of the safest troop transport methods since it was equipped with thick steel armored protection plates and a gun. Each Kommandowagen could...

railcars as protection for their railways which were used to transport troops, supplies and equipment across the battlefield. Kit consists of 336 parts on 8 sprues plus 5 sections of track roadbed for display. Photo-etched turret detail included...

The M1129 Mortar Carrier, also known as MCV-B (Mortar Carrier Vehicle version B), is based on the Stryker infantry carrier vehicle, which is itself a descendant of the Swiss Mowag Piranha III. The precursor of the M1129, the MCV-A, carried a mortar...

The German Army used armored trains to transport equipment and troops across the battlefields of Europe, as well as to hunt tanks and other Allied military equipment. A heavily armored hull and two top mounted 7.5cm KwK L/48 guns (front and rear) secured...

For use with Trumpeter #210 German Armored Locomotive and other 1/35 German military locomotives. These were typically used to transport supplies across the European continent to resupply troops. Watch for other German Army freight car releases later...

Used to transport supplies across WWII battlefields, these freight cars are suitable for use with 1/35 German armored train locomotive kits such as Trumpeter #216 & #217. Kit consists of 248 parts on 7 sprues, plus 5 sections of roadbed track for...

.The LAV-III Kodiak armored personnel carrier is a license produced version of Swiss MOWAG Piranha III. It entered service with the Canadian Army in 1999, which currently operates 651 of these armored personnel carriers. The Kodiak is fitted with a...

The Challenger II is a main battle tank currently in service in the U.K. and elsewhere. It is an extensive re-design from the Challenger I, re-using only the hull and some basic parts. The Challenger II served in Kosovo as well as the 2003 invasion of...

This variant includes a newly tooled mud guard as well as a newly tooled armored cab for re-supply during battle, 2cm Flak 38 gun and SdAnh 52 trailer. Kit consists of 859 parts on 20 sprues, 3 rubber tires, photo etched foot board, mesh, flange, flak...

This variant includes a newly tooled mud guard, head lamps with shades, 3.7cm Flak gun and SdAnh 52 trailer. Kit consists of 856 parts on 21 sprues plus 3 rubber tires, photo etched foot board, mesh, flange, light mount, flak shield and tow cable, plus...

Box contains 616 parts suitable to make any one of 5 variants: M1A1HA M1A1HA with Track Width Mine Plow (TWMP) M1A1HA with Mine roller M1A2 Abrams M1 Panther II Mine Clearing Tank. Includes chain for the mine plough, film part for the periscopes, and...

Kit consists of 294 parts on 7 sprues plus lower and upper hull, turret and rubber tracks. Photo-etched parts for the engine grille are also included.

Similar to 75-ton variant, but with additional armor protection, creating the additional weight class. Kit consists of 294 parts on 5 sprues plus lower and upper hulls turret and rubber tracks. Photo-etched parts for the engine grille are also included.

This is the Flak variant of the E-75 tank, with 37mm Flak Zwilling twin guns and a redesigned suspension system. Designed near the end of WWII, this tank was never fully produced and therefore never actually used in combat. Kit consists of 247 parts on...

In 1942, German designers started the development of a new series, which would utilize chassis and components of various tanks and use them as mountings for various heavy weapons. Designs of the Grille Series incorporated many new technical modifications...

The M1117 Guardian is an all-wheel drive armored vehicle used by the United States Army Military Police Corps. Its armament consists of a Mk 19 grenade launcher and M2 Browning Machine Gun and a M249 Squad Automatic Weapon mounted outside the gunner's...

The BTR-60 is the first vehicle in a series of Soviet eight-wheeled armoured personnel carriers. It was developed in the late 1950s as a replacement for the BTR-152 and was seen first time in public in 1961An order to enter the BTR-60P into Soviet Army...

The 1975 variant was equipped with a KTD-1 or KTD-2 laser rangefinder in an armored box over the main armament. Included is the KMT-6 mine clearing plow. Kit consists of over 500 parts including individual track links, photo-etched details, copper cable...

The T-62 originally was conceived as a companion weapon to the T-55.Being essentially a T55 up gunned with the 2A20 115 mm cannon. Both the T-55 and the T-62 used the same wheels, track, engine, transmission, hatches and other fittings. The primary...

The T-62 originally was conceived as a companion weapon to the T-55.Being Essentially a T55 up gunned with the2A20 115mm cannon. Both the T-55 and the T-62 Used the same wheels, track, engine, transmission, hatches and other fittings. The primary...

The T-62 originally was conceived as a companion weapon to the T-55.Being Essentially a T55 up gunned with the2A20 115mm cannon. Both the T-55 and the T-62 Used the same wheels, track, engine, transmission, hatches and other fittings. The primary...

This variant has the standard LAV-III turret replaced with TOW Under Amour launcher for anti-tank purposes. Kit consists of 546 parts on 11 sprues plus hull, tires and photo-etched for engine cover grill & barrel shelf. Markings are for the...

The MEV is the battalion aid station for brigade units, providing treatment for serious injury and advanced trauma cases. A field evacuation includes emergency care enhanced by the on-board medic and in a protected environment with adequate lighting and...

The KV series were known for their extremely heavy armor protection, which was capable of resisting all German anti-tank weapons up to 75mm and 88mm caliber, both of which were comparatively rare at the time of the initial German invasion of the Soviet...

The Centauro is a wheeled tank destroyer designed for light to medium territorial defense and tactical reconnaissance. It was developed in response to an Italian Army requirement for a tank destroyer with the firepower of the old Leopard 1 main battle...

The Italian �??Centauro�?� is a 4-axles, all wheel driven armored wheeled vehicle. With good mechanical configuration; massive firepower and fine electronic hardware combine together, it is surly one of the best-wheeled armor car on earth. The first...

KV-1S ��� A lighter variant of late 1942 with higher speed, but thinner armour. A new, smaller, cast turret and redesigned rear hull were used. 1370 were built. In response to criticisms, the lighter KV-1S (Russian language: ??-1?) was released,...

KV-1S �?? A lighter variant of late 1942 with higher speed, but thinner armour. A new, smaller, cast turret and redesigned rear hull were used. 1370 were built.In response to criticisms, the lighter KV-1S (Russian language: ????-1?�) was released, with...

A stopgap upgrade to the KV series was the short-lived KV-85 or Objekt 239. This was a KV-1S with a new turret designed for the IS-85, mounting the same 85 mm D-5T gun as the SU-85 and early versions of the T-34-85. Already-high demand for the gun...

The KV-13 program's KV-85 prototype was accepted for production as the IS-1 heavy tank. After testing with both 100 mm and 122 mm guns, the D-25T 122 mm gun was selected as the main armament of the new tank, primarily because of its ready availability...

The SU-152 (?�?�-152) was a Soviet self-propelled heavy howitzer used during World War II. It mounted a 152 mm gun-howitzer on the chassis of a KV-1S heavy tank. Later production used IS tank chassis and was re-designated as ISU-152. Because of its...

This tractor was used to tow medium artillery such as the 152mm gun-howitzer and the B-4 203mm Soviet cannon. It was originally based on the suspension of the T-12 tank and later the T-24, but was much more successful having been improved by designers...

The ESV variant of the Stryker provides the Engineer Squad with highly mobile, protected transport to the battlefield. Integrated into the ESV are obstacle neutralization and lane marking systems and mine detection devices allowing it access to areas of...

This latest Stryker variant is now offered with mine plow added. Kit consists of 923 parts on 23 sprues plus 8 tires. Includes jerry can racks with photo-etched straps, M240B 7.62mm machine gun with photo-etched shield and markings for the US Army...

The BTR-60 is the first vehicle in a series of Soviet eight-wheeled armoured personnel carriers. It was developed in the late 1950s as a replacement for the BTR-152 and was seen first time in public in 1961An order to enter the BTR-60P into Soviet Army...

The T-64 was conceived in Kharkov as the next-generation main battle tank by Alexander A. Morozov, the designer of the T-54. A revolutionary feature of the T-64 is the incorporation of an automatic loader for its 125-mm gun,allowing a crewmember's...

The Sonderkraftfahrzeug 8 was a German half-track that saw widespread use in World War II. Its main roles were as a prime mover for heavy towed guns such as the 21 cm M??rser 18, the 15 cm Kanone 18 and the 10.5 cm FlaK 38. Approximately 4,000 were...

Ten 8.8 cm Flak 18 anti-aircraft guns were mounted on pedestals on DB s8 and DB 9 chassis in 1939 as the 8.8 cm Flak 18 (Sfl.) auf Zugkraftwagen 12t (Sd.Kfz. 8) for anti-tank duties. A gun shield was provided for the 88, but the gun crew had no other...

The leFH-18 was a heavy weapons and munitions carrier/tank destroyer developed jointly by Krupp Ardelt. This variant features a hull/turret-mounted 10.5cm gun. It was a late war development that never saw much action before the allies overran the German...

The BTR-70 is an eight-wheeled armored personnel carrier, originally developed during the late 1960s under the industrial designator GAZ-4905. On August 21, 1972, it was accepted into service and would later be exported to the Warsaw Pact and other...

The BTR-70 is an eight-wheeled armored personnel carrier, originally developed during the late 1960s under the industrial designator GAZ-4905. On August 21, 1972, it was accepted into service and would later be exported to the Warsaw Pact and other...

The basic design of the E-100 was ordered by the Waffenamt as a parallel development to the Porsche Maus in June 1943. After 1944, work continued at a very slow pace and canceled in favor of the Maus. The first prototype was never completed and was found...

The Type 99 155mm HSP (Self-Propelled Howitzer) will be delivered to division artillery regiments to shell enemy artillery units and to support Japanese combat units on the front line with its fire power. This new HSP is expected to replace the current...

The Type 87 AW is a Japanese air defense weapon built around the Oerlikon 35 mm twin cannon system used on the Gepard tank. It had been developed in 1987, given the Type 87 designation status, with Mitsubishi Heavy Industries providing the...

Item No 02046 Item Name PANTHER D Workable Track links for *German VK1602 LEOPARD Bar Code 9580208020464 Scale 1:35 Item Type Model Accessories Model Brief Length: mm Width: mm Height: mm Total Parts 420pcs ...

Item No 02057 Item Name E-25 Workable Track links for *German Entwicklungsfahrzeug E 25 Bar Code 9580208020570 Scale 1:35 Item Type Model Accessories Model Brief Length: mm Width: mm Height: mm Total Parts ...

200 individual track links.

Metal parts included: brass tube, turned aluminum gun barrel, chain

There are 264 parts in light grey plastic , 2 thick rubber rims Markings for German army in field grey camouflage Also includes 4 rubber rims, 2 brass tubes, aluminum gun barrel and metal tow chain. Gun is positional up and down

The M198 is a medium-sized, towed artillery piece. It can be dropped by parachute or transported by a CH-53E Super Stallion. It is deployed in separate corps- and armylevel field artillery units, as well as in artillery battalions of light and airborne...