Trumpeter

The Growler is an American carrier-based electronic warfare aircraft, a specialized version of the two-seat F/A-18F Super Hornet. It will replace the EA-6B Prowler in service with the United States...

The Fairey Swordfish was a torpedo bomber built by used by the Fleet Air Arm of the British Royal Navy during World War II. It was operated primarily as a fleet attack aircraft, however, during...

The first 1/32 F14 new tooling in decades, the D variant is the first in the series! The advanced technology of 3D CAD computer imaging provides for incredible tooling and an unbelievable amount...

Completed kit measures over 22" long with a wingspan of nearly 17".

The F14A was upgraded in 1987 and originally designated as the F14A+, later to be re-designated the F14B. Upgrades included new higher thrust and anti-stall GE F110 engines as well as the ALR-67...

This is the first new 1/32 F-14A Tomcat tooling in decades! One of the best known fighters, the F-14A variant was the initial two-seater all-weather interceptor fighter variant for the US Navy. It...

The de Havilland Hornet was a piston engine fighter that further exploited the wooden construction techniques pioneered by de Havilland's earlier Mosquito. Entering service at the end of the Second...

Following up the hugely successful ??®??A??®???® variant, the ??®??B??®???® version was a two-seat, combat-capable training version. Pilot and instructor were seated in tandem. The fuselage was...

Following up the very successful first release of the Talon, Trumpeter introduces the �?C�� variant, which features the addition of a GPS, INS (Inertial Navigation System), and a traffic collision...

This variant of the Skywarrior was the bomber-trainer version with an updated cockpit for an extra crew member. The bombardier crew position was relocated to the cabin, and the periscope fairing was...

The Douglas A-3�?Skywarrior��was a strategic nuclear bomber developed for the US Navy. The aircraft had a largely conventional semi-monocoque fuselage, with two J57 turbojet engines in underwing...

The Supermarine Attacker was a British single-seat naval jet fighter built by Supermarine for the Royal Navy's Fleet Air Arm (FAA). It was the FAA's first jet fighter.The first production Attacker F...

The Mikoyan-Gurevich MiG-21 Fishbed is a supersonic jet fighter aircraft, designed by the Mikoyan-Gurevich Design Bureau in the Soviet Union. Some 50 countries over four continents have flown the...

This is the Aerobatic version of this modern Chinese fighter. Kit consists of over 220 parts on 10 sprues, photo-etched seat belts and mirror, and special colorful markings of this renowned Aerobatic...

The MiG-23 was designed in 1964-66 as a successor to the MiG-21. In addition to a much more powerful engine, the MiG-23's most significant new feature was its variable sweep wing. Like the USAF's...

The MiG-23 was designed in 1964-66 as a successor to the MiG-21. In addition to a much more powerful engine, the MiG-23's most significant new feature was its variable sweep wing. Like the USAF's...

The Seafang was essentially a Spiteful redesigned for Royal Navy carrier use, Two prototype Seafang MK.32s were ordered on 12 March 1945 followed by an order for 150 Seafang MK.31s on 7 May 1945. To...

The J-8II series appear quite different from the original J-8, with a new forward fuselage, intakes and nose structure more reminiscent of the F-4 Phantom II or Sukhoi Su-15 to house a new, more...

A second variant of the Wyvern previously released from Trumpeter with a new canopy representative of this earlier variant. Kit consists of 224 parts on 7 sprues plus a film instrument panel. ...

Kit consists of 96 parts on 4 sprues, plus markings for HMS Theseus, Korea, 1951 & HMS Vengeance, Cape Town, January 1949. Completed model measures nearly 9 inches long with a nearly 10 inch...

This is the first of its kind in an injection molded plastic in any scale! After the single-seat, supersonic F-100 fighter entered service in 1954, it developed a high accident rate, in part due to...

The definitive F-100D was developed to improve the combat capability of the F-100C by being primarily a ground attack aircraft with secondary fighter capability. It was fitted with autopilot,...

The F100 served in the USAF from 1954 until 1971. It was originally designed as a higher performance follow-up to the F-86 Sabre. Adapted as a fighter bomber, the F-100 would be supplanted by the...

The F9F-3 was powered by an all new 4600 lb Allison J-33 engine. Kit consists of 124 parts on 4 sprues plus a photo etch part and a film instrument panel. Markings are for US Navy VF-51 in Korea...

Completed kit measures nearly 7" long with a wingspan of over 8"

Kit consists of 124 parts on 4 sprues, and the completed kit measures 9 1/2" long with a wingspan of 9 ?‹¨« inches. The "P" variant was an unarmed photographic reconnaissance version used in Korea in...

Kit consists of 124 parts on 4 sprues, and the completed kit measures 9 1/2" long with a wingspan of 9 1/2". Developed post-WWII, the Panther became a mainstay of US Navy and Marine forces in Korea...

Scaled down version of the 1/32 kit released in 2004, this WWII fighter saw extensive action in the air war with Germany. Kit consists of 81 parts on 5 sprues plus markings for VVS (Soviet Air...

Introduce: The Douglas C-48 was the designation given to 36 Pratt & Whitney powered DC-3s impressed by the USAAF after the Japanese attack on Pearl Harbor. They were a mix of aircraft...

Kit consists of 89 parts on 4 sprues plus a photo etched part and film instrument panel. 3 different markings for the West German Marines are included.

Kit consists of 89 parts on 4 sprues, plus a photo etch part, film instrument panel. Completed kit measures about 10" long with a wingspan of just under 10". Markings included: XE365/171-B, 804Sqn,...

Kit consists of 639 plastic parts plus photo etch and a film instrument panel. Markings are for No 115 Sqn RAF 1942 and No 425 Sqn RCAF North Yorkshire 1943. Completed kit measures over 15" long with...

The Thunderbirds were activated in 1953, and the F-100D Thunderbirds were a part of the USAF Air Demonstration Squadron, which was activated on February 13, 1967. By the end of the 1960?s, the...

Kit consists of 220 parts on 7 sprues plus a film instrument panel Markings for 3 variants: WN325 830th Sqn, HMS Eagle 1956, Suez Campaign WL879 813th Sqn, HMS Eagle 1958 WN335 831st Sqn, HMS Ark...

Markings included for: RVAH-5 USS America (CVA-66) RVAH-6 USS Nimitz (CVN-68).

The Vickers Wellington was armed with twin .330 machine guns in the nose and tail turrets. It also had 2 manually-operated .303 guns in the beam positions and could carry a 4,500 lb bomb load. Slow...

Item #210 American LaFrance(R) is a name in fire and rescue equipment which has been in existence for over 100 years. Their entry into the 21st century introduces a line of fire equipment is as...

Kit consists of 233 parts, including 206 in plastic on 12 sprues, 3 rubber tires, PE seat belts and a film instrument panel. Also features postitional wing flaps, fully detailed engine &...

* Kit consists of 233 parts on 13 sprues plus a photo-etched part and markings for 294th Sqn 1942 & 213th Sqn, 1944. * Completed kit measures over 16" long with a wingspan of 20". A newer...

* Kit consists of 260 parts on 11 sprues plus a photo etched part and a film instrumental panel. * Markings for 257 Sqn England 1942 & 87 Sqn England 1942

Includes PE and metal parts.

* Markings included for Bf 109G-10, "Black", of Stab I./JG3, CO Oblt. Seidl * Includes metal and PE parts

Item #2408

Item #2407 contains 272 pieces and includes metal PE parts. Finished model measures: Length:376 mm Wingspan: 411 mm. Markings included: Bf109G-6/R3 4./JG51 Flown by Ltn.Elias Kuhlein 1943 Yugoslavia

Item #2406