Dremel

A shank with a screw-like head used primarily to hold polishing bits and accessories. Used primarily with polishing bits and accessories including the 414, 422 and 429 Dremel accessories Head size is 1/2 In. High quality component Works...

The various interchangeable tips available for the VersaTip�?� Multipurpose tool let you create decorative patterns for wood-burning and leather-crafting, solder electronics, cut plastics and rope and much more. Ideal for wood-burning and...

A slim, aluminum tube that provides the optimal grip for holding a bit in a Dremel rotary tool. The collet features small identification rings around its shank These rings correspond with the size of the collet: 0 rings = 1/8", 3 rings =...

lapwheels grind and polish flat or contoured surfaces Effective as finishing sander after heavy -surface sanding & material removal is complete 1/8 In. mandrel 80 grit for medium finish sanding BIT DIAMETER INCH: 3/16" BIT DIAMETER MM: 4.8 mm

Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass. Ideal for cleaning and surface-finishing items made from gold, bronze, copper or brass Use a brass brush to create a soft, satin or...

A high-speed cutter with a 1/8" steel shank that makes fast clean cuts in drywall. Piloted tip to cut around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features. ...

Ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. You can also create decorative wall tile by cutting a design, such as a sailboat, and filling it with colored grout. Cuts ceramic wall tile, cement board and...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel?? #230 and #330 Router Attachments and #231 Shaper/Router Table. Made of high-speed steel. Ideal for routing, inlaying and mortising in wood and other soft...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel?? #230 and #330 Router Attachments and #231 Shaper/Router Table. Made of high-speed steel. Ideal for routing, inlaying and mortising in wood and other soft...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel?? #230 and #330 Router Attachments and #231 Shaper/Router Table. Made of high-speed steel. Ideal for routing, inlaying and mortising in wood and other soft...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel?? #230 and #330 Router Attachments and #231 Shaper/Router Table. Made of high-speed steel. Ideal for routing, inlaying and mortising in wood and other soft...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel Specially...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel Specially...

Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired...

A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. Fast-cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. Use on...