GT Resin

Resin seamless intakes to fit the Tamiya kits.

Resin seamless intakes to fit the Revell kits.

Highly detailed 1/32 J-79 Engine set for Tamiya F-4 C/D kit and Revell RF-4C kits. These short exhaust cans are correctly sized and a must for either kit build.

Highly detailed 1/32 J-79 engine set with long nozzles for Tamiya F-4 E,EJ, and J kits. Highly detailed and sized correctly to fit the Tamiya kit. A real upgrade over the undersized kit parts.

A highly detailed upgrade for Revell Phantoms in 1/32 Scale. The Exhausts fit the F-4 E/F/G and RF-4E kits and feature accurate Nozzles, burner tubes, and rear engine face.

For the Trumpeter kit The finest A-10 engine set made for the 1/32 Trumpeter A-10 kits. Made using input from GE Corporation using the latest in 3D printing technology. Easy to install

Highly detailed PW 100/220 F-15 A-D engine set. Fits Tamiya and Revell 1/32 F-15 kits.

32011 1/32 F-15 Early E Engine Set for Tamiya F-15E Kits.The highly detailed set comes wi

320

Highly detailed PW 229 Engine set with side MSOG vents. This set ie made for those building a 1/32 F-15I RA‹¨«??AM Strike Eagle and is a necessary addition to Resin Conversion Sets. Set...

1/32 Scale LAU -128/552 Missile rails and adapters. Will fit all 1/32 scale F-15 kits from T

For the Tamiya kit F- 16 CJ PW 229 Conversion Set The set allows conversion of the

For the Tamiya kit 1/32 Scale NSI Intake / Engine conversion set for Tamiya F-16CJ Kit to early Block F-16 Builds

<

Finall

Finally, and accurate resin wheel/tire set for the big Tamiya 1/32 scale F-15C/J kit. Two sets are offered, and differ in the GTR32023 ha Goodyear tires and the GTR32024 features Michelin line...

Finally, and accurate resin wheel/tire set for the big Tamiya 1/32 scale F-15C/J kit. Two sets are offered, and differ in the GTR32023 ha Goodyear tires and the GTR32024 features Michelin line...

AGM-78 STD Antiradiation Missile Kit - The kit will consist of colored resin parts, one clear resin part, decals, and instructions. Build and USAF, USN, or FMO version of this vaunted Sam site...

AGM-45 THUD Pair & Decals - Highly detailed set fo two missiles for use with F-105 models or other aircraft where a US specific launcher was not used. Set includes Decals, parts, and...

AGM-45 Missile set for USAF with LAU-34 Launch Rails & Decals - Highly detailed set fo two missiles for use with USAF F-4 models. Set includes Decals, parts, and Instructions

AGM-45 Missile set for USN with LAU-118 Launch Rails & Decals - Highly detailed set fo two missiles for use with USN A-4, A-6, A-7 and foreign operators of US Aircraft models. Set includes...

ALQ-184 ECM pod. One piece resin pod for US jets

ALQ-71 ECM pod for F-105 Thunderchief

ALQ-71 ECM pod for F-4 Phantom

Set includes one pod with decals and instructions.

Set includes one pod with decals and instructions.

Set includes one pod with decals and instructions.

Exhaust, Fuselage correction set, canopy frame, and correct fin/rudder

Exhaust, Fuselage correction set, canopy frame, and correct fin/rudder

Exhaust, Fuselage correction set, Canopy Frame, and Correct fin/Rudder, and Smooth side fuselage conversion

Exhaust, Fuselage correction set, Canopy Frame, and Correct fin/Rudder

F-16 PW 229 engine set for SUFA kit or any Academy Plastic tooled F-16 kit

1/32 Scale PW 220E Engine set for Academy Plastic kits. Block 5,10,15,20,25,32, and early 42 jets

1/32 F4E

1/32 F-4

1/32 F-4

Set includes parts to build one drop tank

Original Old Style Center Line Drop Tank for 1/32 scale F-4 Phantom kits. Tank is a necessary extra when building the Tamiya F-4C/D kit as this kit does not come with a Centerline drop tank, but most...

The ear

1/32 Scal

For the R

GTR32072 - Corrected and highly detailed Vertical fin with separate rudder and detailed cooling intake. Fits the trumpeter and Hobby Boss F-105D kit and can also be used if making a F-105B...

GTR32073 - A necessary fix for the badly undersized fin on the Trumpeter F-105G kit. This set features a Vertical fin with the correct chord and ECM node placement, Separate rudder, and Cooling...

GTR32074 - Correction set to fix the badly shaped nose not he Trumpeter F-105D and F-105G kits. The set also includes a correctly shaped Ventral fin and gives you three option for the under nose...

GTR32075 - Detailed Exhaust nozzle for Trumpeter and Hobby Boss F-105 kits. Part feature a seamless interior that used the Kit burner flame holder. IT eliminates the separate parts and their...

GTR32076. Detailed Canopy Trim to finish out the canopy frame. The Thud had a massive frame around the canopy moving section that is missing from the plastic kit.

GTR32077. Detailed Canopy Trim to finish out the canopy frames of both cockpits. The Thud had massive frames around the canopy moving sections that is missing from the plastic kit. This set adds...

The set contains the nose gear shimmy dampener used on all Strike Eagles, as well as both large a

Highly detailed exhaust nozzle for the 1/32 Italeri F-104 kits. Part is a direct replacement for the plastic kit nozzle and installs in the same manner as the kit plastic parts�??.for a drop in...

Highly detailed exhaust nozzle for the 1/32 Italeri F-104 kits. Part is a direct replacement for the plastic kit nozzle and installs in the same manner as the kit plastic parts�??.for a drop in...

Highly detailed intake FOD plugs for 1/32 scale F-15. These fit all Tamiya and Revell 1/32 scale F-15 kits

Set features the Michelin ƒ??Aviatorƒ? brand tires used on many of the Eagles with separate, no mask wheels and tires, and brake drum specifically for the Revell Kit. Tires and wheels are...

Set features ƒ??Good Yearƒ? brand tires used on many of the Eagles with separate, no mask wheels and tires, and brake drum specifically for the Revell Kit. Tires and wheels are designed with...

1/32 Scale F-4C Phantom cockpit resin set for Tamiya F-4C/D kit. Set features :ƒ?› Highl

Includes parts to build two seats.

1/32 Scal

Smooth nose cone for the Tamiya F-4 C/D kit. Some aircraft involved in operation Bolo, including Col. Robin Olds mount are believed to have had smooth nose cones during the time period of Operation...

USN style inner wing pylons

Set of 4 Highly detailed LAU-129 Missile Launch Rails to upgrade the Tamiya F-16CJ kit. These rails are resin cast to fit the wing end stations and the underwing pylons used to mount AARAM and...

Includes parts to build two seats.

GTR32099 is our new 1/32 F-1

GTR32100 is our new 1/32 F-1

1/48 scale US BLU-27 Napalm Canister Bombs. Can also be modified by removing the fins to use as travel pods for all US and some Foreign US made jets.   This is an accessory for a plasti

1/48 scale highl

Kit nozzles are on the left while the GT Resin nozzles are on the right. For the Zoukei-Mura kit 1/48 scale detailed replacement nozzles for Zoukei-Mura F-4J/S. These ar

For the

For the Hasegawa kit For advanced modellers only. NOTE - cutting the kit parts will be required to install these intakes.

1/48 scale ALQ-119. ECM Pod. Used on US and allied modern jets form 70's through Desert Storm