LMG

  Wooden building jig for building, painting of airplane scake models.  Assembly required. The working field is 210 * 250 mm. Compatible with the LMGBB04 rotary table. Material - polished plywood 3.6 mm

  An additional module for assembling bi-planes. For use with either LMGBB01 or LMGBB07 airplane assembly jigs (NOTE - cannot be used without one of these base assemble jigs). Assembly required. Material - polished plywood 3.6 mm

  An additional module for the installation of the transverse V. For use with either LMGBB01 or LMGBB07 airplane assembly jigs (NOTE - cannot be used without one of these base assemble jigs). Assembly required. Material - polished plywood 3.6 mm

  Rotary table for assembling and painting models. Diameter 185 mm, rotation angle fixed at 5 degrees. It can be used both as a separate device and as an addition to the LMGBB01, LMGBB05, LMGBB06, LMGBB07, LMGBB20, LMGBB21 jigs Material - polished...

  Wooden building jig for building, painting of AFV scale models.  Assembly required. Cross-shaped stand of 200 * 200 mm. With the help of interchangeable modules, it is possible to fix case parts with an internal diameter from 5 to 150 mm and...

  Wooden building jig for building, painting ofship scale models.  Assembly required. The dimensions of the table are 250 x 550 mm, the maximum distance between the supports is 470 mm. The range of interchangeable fasteners is up to 210 mm...

<   Wooden building jig for building, painting of airplane scake models.  Assembly required. The working field is 130 x 160 mm. Compatible with the LMGBB04 rotary table. Material - polished plywood 3.6 mm