New Arrivals

UH‑60 Black Hawk helicopters entered service with the United States Army in 1979. The first production variant was the UH‑60A, followed by the development of numerous other modifications. The UH‑60 Black Hawk became a basic platform for helicopters of...

Serial production of the HP.52 Hampden B.Mk.I bomber began in the spring of 1938, and the first aircraft reached operational units by the autumn of the same year. With the outbreak of the Second World War, these bombers were actively employed by the...

During World War II, the smallest administrative unit in the U.S. Army Air Corps (USAAC) was a group consisting of two to four squadrons. Air groups were equivalent to army regiments and were distinguished by their aircraft types. For example, the...

The German Do 217M-1 bomber was a variant of the Do 217 series, equipped with DB 603A engines producing 1,750 horsepower. Combined with four-blade propellers, this significantly improved the bomber’s flight performance and increased its maximum...

The training of future Luftwaffe pilots began at a special flying school, also referred to as the “A/B School.” Cadets received 100–150 flight hours, starting with a few hours of instruction with an instructor, followed by...

Hot and hearty meals on the front lines played a much more significant role for soldiers than for ordinary civilians in peacetime. Regular meals during wartime not only addressed the issue of maintaining combat readiness but also had considerable moral...

In 1913, Henry Ford launched the world’s first moving assembly line at his automobile factory, achieving a technological revolution. The Model T became the first mass-produced automobile in the world. By the following year, it accounted for 56% of...

The Mgebrov-R armoured car is a highly detailed plastic model kit representing one of the most distinctive and technically ambitious Russian armoured vehicles of the First World War. Designed under the leadership of engineer A. N. Mgebrov, this vehicle...

The Nieuport 11 Early Version is a pivotal aircraft in World War I history, introduced in early 1916 to address the challenges posed by the German Fokker Eindecker series during the Fokker Scourge. This model features long cockpit side panels, a...

Brassin set air-to-air missile AIM-120C in 1/48 scale.Made by direct 3D printing.Set consists of 4 missiles. Easy to assemble, replaces plastic parts. Set contains: 3D print: 20 parts decals: yes photo-etched details: no painting mask:...

Brassin set air-to-air missile AIM-120A/B in 1/48 scale.Made by direct 3D printing.Set consists of 4 missiles. Easy to assemble, replaces plastic parts.Set contains: 3D print: 20 parts decals: yes photo-etched details: no painting mask: no   This...

For the Great Wall Hobby kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Great Wall Hobby kit TFace masks are designed to mask the canopy from both sides, outside as well as inside, so they allow to paint both surfaces of the canopy. All these masks are offered in two items, in TFace fashion, and also in standard...

For the Great Wall Hobby kit Note - not all PE frets may be pictured. To see contents of set, go to www.eduard.com This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately...

3D decals Easy to apply. For the Great Wall Hobby kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if...

For the Revell kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Revell kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Revell kit TFace masks are designed to mask the canopy from both sides, outside as well as inside, so they allow to paint both surfaces of the canopy. All these masks are offered in two items, in TFace fashion, and also in standard style, with...

3D decals Easy to apply. For the Revell kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if...

3D decals Easy to apply. For the Revell kit   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if...

Brassin set exhaust stacks for Hurricane Mk.I in 1/48 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Arma Hobby Set contains: 3D print: 2 parts decals: no photo-etched details: no painting mask:...

Brassin set the undercarriage wheels for Hurricane Mk.I in 1/48 scale.The set consists of the main wheels and a tail wheel.Easy to assemble, replaces plastic parts.Recommended kit: Arma Hobby Set contains: resin: 3 parts 3D print: 1 part decals:...

LööK set Brassin pre-painted dashboard and STEEL seat belts for Hurricane Mk.I in 1/48 scale.Easy to assemble, replaces plastic parts.Recommended kit: Arma Hobby Set contains: resin: 2 parts decals: no photo-etched details:...

3D decals Easy to apply.

3D decals Easy to apply.

Brassin set cockpit for MiG-21F in 1/48 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Eduard Set contains: 3D print: 25 parts decals: yes photo-etched details: yes painting mask: no   This is an...

Brassin set a ladder used by pilot to board MiG-21F in 1/48 scale.Made by direct 3D printing.Easy to assemble.Recommended kit: Eduard Set contains: 3D print: 1 part decals: no photo-etched details: no painting mask: no   This is an accessory...

Brassin set the undercarriage legs and wheel bay doors for Spitfire Mk.I or Mk.II or Mk.Va or Mk.Vb in 1/48 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Eduard Set contains: 3D print 4 parts decals:...

Brassin set the undercarriage legs and wheel bay doors for Fw 190A-8/R2 in 1/48 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Eduard Set contains: 3D print 2 parts resin: 2 parts decals: no photo-etched...

Collection of 3 sets for Hs 129B in 1/48 scale.Recommended kit: Takom LööK set (pre-painted Brassin dashboard & Steelbelts) undercarriage wheels, TFace painting mask   This is an accessory for a plastic model kit. Assembly and...

For the Italeri kitNOTE - not all PE frets may be pictured. Go to www.eduard.com to see entire contents of set.   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately...

For the Italeri kitNOTE - not all PE frets may be pictured. Go to www.eduard.com to see entire contents of set.   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately...

For the Italeri kitNOTE - not all PE frets may be pictured. Go to www.eduard.com to see entire contents of set.   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately...

Recommended kit: Airfix  This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).  

Brassin set aileron ballance weights for Bf 109G-5 or G-6 in 1/24 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Airfix Set contains: 3D print: 2 parts decals: no photo-etched details: no painting mask:...

Brassin set exhaust stacks for Bf 109G-5 or G-6 in 1/24 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Airfix Set contains: 3D print: 12 parts decals: no photo-etched details: no painting mask:...

Brassin set gun barrels for Bf 109G-5 or G-6 in 1/24 scale.Made by direct 3D printing.Easy to assemble, replaces plastic parts.Recommended kit: Airfix Set contains: 3D print: 4 parts decals: no photo-etched details: no painting mask:...

Brassin set rudder pedals for Bf 109G-5 or G-6 in 1/24 scale.Made by direct 3D printing.Set consists of a pair of pedals.Easy to assemble, replaces plastic parts.Recommended kit: Airfix Set contains: 3D print: 2 parts decals: no photo-etched...

Brassin set the undercarriage wheels for Bf 109G-5 or G-6 in 1/24 scale.The set consists of the main wheels and a tail wheel.Easy to assemble, replaces plastic parts.Recommended kit: Airfix Set contains: resin: 3 parts decals: no photo-etched...

For the HobbyBoss kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the HobbyBoss kit NOTE - not all PE frets may be pictured. Go to www.eduard.com to see contents of set   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This...

For the HobbyBoss kit NOTE - not all PE frets may be pictured. Go to www.eduard.com to see contents of set   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This...

For the HobbyBoss kit NOTE - not all PE frets may be pictured. Go to www.eduard.com to see contents of set   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This...

For the HobbyBoss kit NOTE - not all PE frets may be pictured. Go to www.eduard.com to see contents of set   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This...

For the HobbyBoss kit NOTE - not all PE frets may be pictured. Go to www.eduard.com to see contents of set   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This...

For the HobbyBoss kit 3D decals for main and sidewall instrument & control panels and seat belts.Easy to apply.   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold...

For the Tamiya kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Tamiya kit 3D decals for main and sidewall instrument & control panels and seat belts.Easy to apply.   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately...

Brassin set an advanced precision targeting pod AN/AAQ-28 Litening in 1/72 scale.Made by direct 3D printing.Set consists of 1 pod. Easy to assemble, replaces plastic parts. Set contains: 3D print: 3 parts decals: yes photo-etched details:...

Brassin set air-to-air missile AIM-9M/L in 1/72 scale.Made by direct 3D printing.Set consists of 4 missiles. Easy to assemble, replaces plastic parts. Set contains: 3D print: 12 parts decals: yes photo-etched details: no painting mask:...

Collection of 4 sets for F-35B in 1/72 scale.Recommended kit: Tamiya LööK set (pre-painted Brassin dashboard & Steelbelts) undercarriage wheels ejection seat painting mask   This is an accessory for a plastic model kit. Assembly and...

Collection of 4 sets for F-35A in 1/72 scale.Recommended kit: Tamiya LööK set (pre-painted Brassin dashboard & Steelbelts) undercarriage wheels ejection seat painting mask   This is an accessory for a plastic model kit. Assembly and...

LööK set Brassin pre-painted dashboard and STEEL seat belts for Bf 109K-4 in 1/72 scale.Easy to assemble, replaces plastic parts.Recommended kit: Eduard Set contains: resin: 1 part decals: no photo-etched details: pre-painted painting...

LööK set Brassin pre-painted dashboard and STEEL seat belts for F-16CJ Block 50 in 1/72 scale.Easy to assemble, replaces plastic parts.Recommended kit: Tamiya Set contains: resin: 3 parts decals: no photo-etched details:...

For the Eduard kit NOTE - not all PE frets may be pictured. Go to www.eduard.com to see contents of set   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This...

For the Fine Molds kit 3D decals for main and sidewall instrument & control panels and seat belts.Easy to apply.   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold...

Collection of 3 individual sets for P-47N  in 1/48 scale.Recommended kit: Miniart general set seatbelts STEEL painting mask   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is...

Collection of 3 individual sets for P-400  in 1/48 scale.Recommended kit: Arma Hobby general set landing flaps seatbelts STEEL   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and...

Collection of 5 individual sets for A-4C  in 1/48 scale.Recommended kit: Hobby Boss general set air brakes seatbelts STEEL Remove Before Flights tags painting mask   This is an accessory for a plastic model kit. Assembly and painting...

Collection of 7 sets for Hurricane Mk.IIc in 1/48 scale.Recommended kit: Arma Hobby LööK pre-painted dashboard exhaust stacks undercarriage sheels seat cockpit doors gun barrels wing gun bays   This is an accessory for a plastic model...

Collection of 7 sets for Hurricane Mk.IIc in 1/48 scale.Recommended kit: Arma Hobby LööK pre-painted dashboard exhaust stacks undercarriage sheels seat cockpit doors gun barrels wing gun bays   This is an accessory for a plastic model...

The decal set for 1/48 P-51D Mustang. Best fit for the Tamiya / Hasegawa / Airfix 1/48 P-51D kit. Total 1 type of markings included for the P-51D in the movie. Canopy mask included (for Tamiya kit). 1 sheet Water slide type decal Total 1 decal sheet...

Decal set of F-14A VF-142 Ghostriders. Best fit for the Academy 1/72 F-14A (12563) kit. Also applicable to most 1/72 F-14A kits. Total 4 types of markings included. Water slide type decal This is a waterslide decal sheet. For ages 14 years old and up...

Decal set of F-14A VF-33 Starfighters. Best fit for the Academy 1/72 F-14A (12563) kit. Also applicable to most 1/72 F-14A kits. Total 1 marking for BuNo.159428. Water slide type decal This is a waterslide decal sheet. For ages 14 years old and up...

F-20 Tiger Shark Nozzle set (GE F404 Early type) Opened- for 1/48 Freedom model kit Full 3D printed parts. The tip of the part is very delicate, so it must be handled with care. Total 3 resin parts. This is an accessory for a plastic model kit...

F-20 Tiger Shark Nozzle set (GE F404 Early type) Closed- for 1/48 Freedom model kit Full 3D printed parts. The tip of the part is very delicate, so it must be handled with care. Total 3 resin parts. This is an accessory for a plastic model kit...

F-14D Tomcat SJU-17/A (Mk.14) Ejection seat set / twin for Tamiya 1/48 kit Full 3D printed parts. The tip of the part is very delicate, so it must be handled with care. Please pay attention to the distinction between the front and rear seats. Total 2...

F-35 Lightning II US16E Ejection seat set for Tamiya 1/48 kit Full 3D printed part. Common to all variants of the F-35. The tip of the part is very delicate, so it must be handled with care. Be careful when removing supports from 3D printed parts....

F-20 Tiger Shark Nozzle set (GE F404 Early type)Opened- for 1/72 Hasegawa kit Full 3D printed parts. The tip of the part is very delicate, so it must be handled with care. Total 3 resin parts. This is an accessory for a plastic model kit. Assembly and...

F-20 Tiger Shark Nozzle set (GE F404 Early type) Closed- for 1/72 Hasegawa kit Full 3D printed parts. The tip of the part is very delicate, so it must be handled with care. Total 3 resin parts. This is an accessory for a plastic model kit. Assembly...

ROK Army K808 8X8 Armoured Personal Carriar(APC) sagged wheel set for Academy 1/35 kit. Produce Michelin XZL 365/80 R20 tire Correct tires size, correct tread pattern, Fine detail wheels 4 kind of different pattern directions weighted wheels x2 and...

IDF Eitan 8X8 Armoured Personal Carriar(APC) sagged wheel set for Hobbyboss 1/35 kit. Produce Michelin XML 415/80 R685 TR tire Correct tires size, correct tread pattern, Fine detail wheels 4 kind of different pattern directions weighted wheels x2 and...

German Wolf SSA Armoured Vehicle sagged wheel set for Neverland hobby 1/35 kit. Produce Bfgoodrich All-terrian T/A KO2 LT265/75R16 tire Correct tires size, correct tread pattern, Fine detail wheels 2 kind of different pattern directions weighted...

German Wolf SSA Armoured Vehicle sagged wheel set for Neverland hobby 1/35 kit. Produce Bfgoodrich All-terrian T/A KO LT 265/75R16 tire Correct tires size, correct tread pattern, Fine detail wheels 2 kind of different pattern directions weighted...

Russian Gaz-233114 Tiger-M wheel set for 1/35 Zvezda, Meng Accurate tires tread pattern, Fine detail wheels KN-115 12.00 R20 tire 4 kind of different pattern directions weighted wheel. It consists of 2 left wheels, 2 right wheels, and 2 parts for the...

US Buffalo A2 6x6 MPCV Sagged wheel set for Panda 1/35 kit Accurate tires tread pattern, Fine detail Michelin XZL 16.00 R20 tire It consists of 2 front wheels, 4 rear wheels and wheel mask seals Total 6 resin parts & Wheel mask   This is an...

Soviet UAZ - 469 Truck Sagged Wheel set for Zvezda new 1/35 Correct tires tread pattern, Fine detail "CCCP 840-15 Military tire 2 front, 2 rear sagged wheels, 1 spare Wheel and wheel mask Total 5 resin parts & Wheel mask   This is an...

Danish Utility Vehicles Mowag Eagle IV Sagged wheel set - for Vespid kit Correct tires tread pattern, Fine detail "MIchelin 335/80R-20 XZL tire" These wheel set wheel covers are designed to be used as kit parts. So separate wheel cover parts are...

German Utility Vehicles Mowag Eagle IV Sagged wheel set - for Vespid, Das Werk kit Correct tires tread pattern, Fine detail "Continental MPT 81 335/80R-20 MPT tire" These wheel set wheel covers are designed to be used as kit parts. So separate...

WWII German Faun L900 Transport truck wheel set(1) for 1/35 Das Werk kit It reproduces the exact size and shape of Fulda 13.50-20 Extra tires. Naturally self-weight deformed tire shape. It consists of 2 front wheels 4 rear wheels, 4 rear wheel axl...

WWII German Faun L900 Transport truck wheel set(1) for 1/35 Das Werk kit It reproduces the exact size and shape of Contiental 12.75-20 Extra tires. Naturally self-weight deformed tire shape. It consists of 2 front wheels 4 rear wheels, 4 rear wheel axl...

Rommel's command Vehicle sd.kfz 250/3 Halftrack Sagged front wheel set - for 1/35 sd.kfz 250/3 Greif kit It reproduces the exact size and shape of a Contiental 6.00-20 Gelande tires(DW30076) and a Donlop supra ballon tire(DW30077). Naturally...

German sd.kfz 250 Halftrack Sagged front wheel set(3) - for 1/35 sd.kfz 250/ Demag D7 kit It reproduces the exact size and shape of Phoenix Harburg 6.00-20 Gelande tires. Naturally self-weight deformed tire shape. It consists of 2 front wheels and...

German sd.kfz 250 Halftrack Sagged front wheel set(2) - for 1/35 sd.kfz 250/ Demag D7 kit It reproduces the exact size and shape of Donlop 6.00-20 Supra Ballon tires. Naturally self-weight deformed tire shape. It consists of 2 front wheels and wheel...

German Trippel SG.6 Sagged wheel set - for 1/35 Das Werk kit It reproduces the exact size and shape of Continental 7.50-17 gelande tires. Naturally self-weight deformed tire shape.. It consists of 2 front wheels, 2 rear wheels and wheel mask...

WWII German Sd.kfz.9 Famo Sagged front wheel set (1) for 1/35 Tamiya, Trumpeter kit It reproduces the exact size and shape of Continental 12.75-20 Extra tires. Consist of 2 sagged front wheels and 1 spare wheel Wheel axl and wheel cover made by 3D...

  Russian T-34/85 Tank workable track links set Full 3D printed parts(dark brown color). Easy to assemble by hand Each side need to at least 35pair (70 pieces) tank links Parts for the front spare track are included Includes total 170 resin parts...

R.O.K Army AS1729 Antenna double set for 1/35 Academy kit Very precise brass machined antenna parts included. Antenna base spring with 4 positions resin parts are provided. Used in Academy kits: K2, K21, K808, K1A2, etc. (※Antenna hole sizes may vary...

WWII US M10/M36 Sandbag front armour for 1/35 Tamiya kit Best fit for Tamiya M10/M36 Jackson kits. Contained a piece of resin sandbag front armour part, 3D printed Front/Rear light guard and Covered M2 machine gun Total 7 resin parts   This is...

US M36 Jackson 90mm M3 Barrel set- Mid (2) for Tamiya 1/35 kit Apply for Tamiya M36 Jackson Total 2 metal barrel parts include   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is...

US M36 Jackson 90mm M3 Barrel set- Mid (1) for Tamiya 1/35 kit Apply for Tamiya M36 Jackson Total 2 metal barrel parts include   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is...

US M36 Jackson 90mm M3 Barrel set- Early for Tamiya 1/35 kit Apply for Tamiya M36 Jackson Total 1 metal barrel part include   This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is...

US XM813 30x173mm cannon Cartridges case set for 1/35 kit. Suitable for vehicle kits using XM813,MK.44 30mm cannons. - M1296 Stryker Dragoon, etc. It is provided in Black color 3D printed parts. The M1296 Stryker Draoon muzzle brake part is provided as...

Hetzer Short-nosed type Mantlet Set. mid-late ver. for Academy, Tamiya and ETC. 1/35 This product reproduces the short-nosed type hetzer mantlet commonly seen in the latter half of World War II. Includes metal barrel and ball mount parts. Can be used...

Russian 30mm 2A42/72 cannon Cartridges and clip set for 1/35 kit. Suitable for vehicle kits using 2M42, 2M47 30mm cannons. - BMP-2/3, BMD-2/3/4, BMPT, Typhoon-VDV, etc. It is provided in 3D printed parts It is very small and fragile, so some parts may...

US M242 25mm Ammunition box set with Decal It comes with 3D printed 5 plastic boxes and 5 steel boxes. Includes water slide decal for box letters. Total 10 resin parts with 1 sheet of decal   This is an accessory for a plastic model kit. Assembly...

Israeli Tank M51 105mm Metal barrel /w Muzzle brake set for Tamiya 1/35 kit. There are three types of muzzle brakes included based on the usage period. The muzzle brake parts are made using 3D printing. Total 1 metal barrel part and 3 resin parts...

1/35 T-90 Mantlet canvas Cover set Natural, Simply change, can make more realistic canvas cover. Made only one piece resin canvas part. For 1/35 ZVEZDA T-90 kit. Total 1 resin part Master by WIND MARK MODELS. This is an accessory for a plastic...

1/35 WWII German Tank crew rest leaning against the Tank Included 1 figure Contained 2 style head Full 3D sculpting and printed product Total 3 resin parts   This is an unassembled plastic model kit. Assembly and painting required. Paint and...

1/24 Female delivery driver figure 2 kind of chest parts included, can choose which one to assemble. Included 1 figure. Full 3D sculpting and resin production Total 8 resin parts   This is an unassembled plastic model kit. Assembly and painting...