Aircraft

For the ICM kit The plugs are made of flexible foam. They are used to cover the area of the wheelbay before spraying paint on the surrounding surfaces of the model.   This is an accessory for a plastic model kit. Assembly and painting required...

For the Eduard kit The plugs are made of flexible foam. They are used to cover the area of the wheelbay before spraying paint on the surrounding surfaces of the model.   This is an accessory for a plastic model kit. Assembly and painting required...

For the ICM kit The plugs are made of flexible foam. They are used to cover the area of the wheelbay before spraying paint on the surrounding surfaces of the model.   This is an accessory for a plastic model kit. Assembly and painting required...

For the Tamiya kit The plugs are made of flexible foam. They are used to cover the area of the wheelbay before spraying paint on the surrounding surfaces of the model.   This is an accessory for a plastic model kit. Assembly and painting required...

For the HobbyBoss kit The plugs are made of flexible foam. They are used to cover the area of the wheelbay before spraying paint on the surrounding surfaces of the model.   This is an accessory for a plastic model kit. Assembly and painting required...

For the Hasaegawa kit The plugs are made of flexible foam. They are used to cover the area of the wheelbay before spraying paint on the surrounding surfaces of the model.   This is an accessory for a plastic model kit. Assembly and painting required...

For the Kotare kit The plugs are made of flexible foam. They are used to cover the area of the wheelbay before spraying paint on the surrounding surfaces of the model.   This is an accessory for a plastic model kit. Assembly and painting required...

For the Revell kit The plugs are made of flexible foam. They are used to cover the area of the wheelbay before spraying paint on the surrounding surfaces of the model.   This is an accessory for a plastic model kit. Assembly and painting required...

  VMFA(AW)-533 BuNo 164959 Operation Iraqi Freedom, Al Asad Air Base, Iraq 2008 VMFA(AW)-224 BuNo 164699 MCAS Iwakuni, Japan 2009 VMFA(AW)-332 BuNo 164870 Operation Deny Flight, Aviano Air Base, Italy 1994 - One of several F/A-18D's from the...

Mk-76 practice bombs (6 per pack) These new 3D printed bombs come ready to paint and install. Some very light clean up may be necessary at the aft end of the fins to remove any trace of the printing supports. Simply paint FS35109 Blue and...

This set includes two (2) Mk-83 1000lb bombs, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was...

AN/ALQ-144, ready to paint and attach to your model. This set includes one (1) AN/ALQ-144. For AH-1W, AH-64A/D/E, UH-1N, H-60, OH-58, VH-3D and OV-10

This set contains all of the parts necessary to convert the Academy 1/32 F/A-18D into an ATARS Configured aircraft. The Advanced Tactical Airborne Reconnaissance System (ATARS) had its combat debut in 1999 with VMFA(AW)-332 during Operation Allied Force...

This set includes two (2) Mk-83 1000lb bombs, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was...

Includes parts to build 6 bombs.

This set includes two (2) Mk-83 1000lb bombs with the Thermal Protective coating, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs.The Mk-83 was the weapon of choice for the USN and USMC during...

This set contains six (6) Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following : M904 Nose FuzeMk-43 TDDMXU-735 Solid Nose PlugBombs come as shown in the photo. Light sanding may be needed on the aft end of...

  Set of four (4) 3D printed launchers The LAU-7/A was developed in June of 1958 for use on the F4H-1 (F-4B) and designed to be used with the AIM-9B missile. This version was in service until May of 1969 when AAC-545 was introduced.

Set of four (4) 3D printed launchers In January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6. Over the course of the next several years, numerous AAC's changed the designation of the launcher to...

This set contains two (2) LAU-10 5.00" rocket pods with empty tubes. Tubes are hollow the whole length of the pod.

For the Academy F-16 kit

For the Academy F-18 kit

For the Academy F-16D/I kit

For the Wolfpack WPD32038 kit

For the Kitty Hawk kit

AN/AAQ-28 UTENING Pod FUR/TV windows. Cut in blue and yellow holographic vinyl.

AN/AAS-38 and AN/ASQ-173 FLIR/Designator lens. Cut in holographic blue and yellow vinyl and designed for the Academy F/A-18 kits. Enough for six aircraft.

Item #V32002 can be used with any F-18A Hornet kit. Keywords: F-18 F/A-18

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

NOTE - a placement guide is NOT included. This item only includes the what is pictured above.

Decal set to make the white special painting of F-4 EJ airplane 07-8428 belonging to 302th fleet which was closed on 19-03-2019 Printed by Cartograph

Decal set to make the black special painting of F-4 EJ airplane 77-8399 belonging to 302th fleet which was closed on 19-03-2019 Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

Printed by Cartograph

 

 

 

 

 

 

 

Marking included: RF-4C Phantom II of the 117th Reconnaissance Wing, Birmingham Recce Rebels, Alabama ANG 35th Anniversary Special Paint Scheme Base kit:  Revell of Germany RF-4C

For all variants of the Revell Phantom kit

For the Revell kit

Final version of RF-4E, it was design to add more speed to RF! This is why they called it "High speed nose". It has been used by US ANG towards end of F-4 use in USA but long years served in German, Japanese, Greek and Turkish AF after US...

For the Revell/Tamiya kit

Limited Edition For the Hasegawa/Kitty Hawk kit Cutting is required of the base kit.  Recommended for advanced modelers.

Includes 1 seat

Includes 1 seat

* Includes 1 seat

Includes 1 seat

Includes 3 gunsights

Includes a total of 3 gunsights

For the Hasegawa kit

Includes two gun barrels For the Hasegawa kit.

Set contains three gun sights and is for use with P-47D-20-RE Thunderbolt, P-47D-35-RE, F4F Wildcat, F4U Corsair

For the Hasegawa kit

For the Hasegawa kit

Includes 1 seat

Includes 2 control sticks

For the Hasegawa kit

For the Hasegawa kit

Item #32021 Keywords: F-117

For the Hasegawa kit

* For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

For the Hasegawa kit

Includes 2 seats

For the Hasegawa and Revell kits.

Includes two seats