Exterior Sets

For the Academy kit

For the Trumpeter kit

For the Trumpeter kit

For the Kinetic kit

For the Revell kit

For the Trumpeter kit

For the Italeri kit

For the Trumpeter kit

For the Kitty Hawk kit

For the Trumpeter kit

For the Trumpeter kit

For the Trumpeter kit

For the Trumpeter kit

For the Revell kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

1/32 Turnbuckles 2 types: - length 7,5 mm, eyelet 1,1 mm halfround (outer diameter) - 25 pc. - length 7,0 mm, eyelet 1,0 mm oval (outer diameter) - 25 pc. 3D printed   This is an accessory for a plastic model kit. Assembly and painting required...

This set consists of one detailed, accurate upper cowling. This set improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell’s Bf 109G-6 kit part. For non-Erla built Bf-109G-6s. A one piece,...

This set consists of one detailed, accurate upper cowling specific to the Erla built 109G-5 and G-6 aircraft. The gun troughs are different on these Erla built machines. Erla upper cowlings have a rectangular panel line around them. This set also...

This set contains a pair of new resin wing sections featuring accurate intake & exhaust ramps to replace the flat wing sections in the kit. Also included are new detailed radiator fairings and radiator faces to replace the less detailed kit parts...

Contains 4 sets of resin cast aileron mass balances (or 3 sets and a couple of spares) to replace lost, broken kit or crude parts. Can be fitted to any 1/32nd kit of the Bf 109F, G or K. Simple installation.

Dual layer printed Ultra flexible Cn be washed Can be varnished

Sheet measures 6.5 inches x 4.75 inches in size.

Sheet measures 6.5 inches x 4.75 inches in size.

  This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Hasegawa kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Hasegawa kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Hasegawa kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Hasegawa kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Hasegawa kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Trumpeter kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Trumpeter kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Trumpeter kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Trumpeter kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Trumpeter kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Trumpeter kit This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

For the Tamiya (Block 25 & 30) and Academy (Block 40/42/50/52) kit Self Adhesive Made out very thin metal (thinner than standard photo-etch) and clearly shows rivet and panel line details. NOTE - These stiffeners look better in person than the picture...

Best fit for the Tamiya kit Self Adhesive Made out very thin metal (thinner than standard photo-etch) and clearly shows rivet and panel line details. NOTE - These stiffeners look better in person than the picture is able to show.  Also, they are...

Brassin set - a propeller with the spinner for Fw 190A-8 in 1/32 scale. Recommended kit: Revell Easy to build, replaces plastic parts. Set contains: resin: 7 parts decals: no photo-etched details: yes painting mask: no

Brassin set - the propeller for Bf 108 in 1/32 scale. Recommended kit: Eduard Easy to assemble, replaces plastic parts. Set contains: resin: 2 parts decals: yes photo-etched details: no painting mask: yes

  This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

  This is an accessory for a plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. This item intended for use with the model kit specified (if specified).

Collection of 4 Brassin sets for Fw 190A-8/R11 in 1/32 scale by Revell. cockpit fuselage guns mount painting mask PE landing flaps

1/32 Scale F-15 Update/Detailed Antenna set with parts to make any configuration. Designed to fit the Tamiya F-15C,E,J and Bunker Buster kits. The Antenna parts will also fit the Revell F-15C/D/E kits.

Exhaust, Fuselage correction set, canopy frame, and correct fin/rudder

Exhaust, Fuselage correction set, Canopy Frame, and Correct fin/Rudder

1/32 F4E/F corrected nice for Revell Phantoms.Includes detailed gun muzzle and both styles muzzle fairing,

1/32 F-4G corrected nose and complete Antenna set. Add the parts Revell got wrong and left missing that are necessary to make an accurate WW from Revell‹¨«??s kit.

1/32 F-4E/G Belly Strap. Fits both Revell and Tamiya Kits. The belly strap was used on all of the hard wing F-4E‹¨«??s (about 1/3 of those built) when upgraded with maneuvering slats. All F-4G‹¨«??s used these as they were converted hard wing...

1/32 Scale F-4E Slat Wing Set with TISEO made for the Tamiya F-4E/EJ kit The Set is the finest slat wing kit ever offered for converting the Tamiya hard wing f-4E kits into the Slat wing version. The wings are designed using current 3D CAD and 3D...

A limited re-release of the highly detailed 1/32 Scale GT Resin F-4G Wild Weasel Super Set for converting either the F-4E /EJ kits into this deadly Wild Weasel Version. The set has updated Cockpit tub eliminating the sanding mess associated...

1/32 Scale F-4E/F/G Slatted wing upgrade - Also fit the RF-4C?E kits if building the Greek Slatted wing Recce! The Set is the finest slat wing kit ever offered for upgrading the Revell F-4E/F/G kits with accurate and highly detailed Slatted outer...

For the Revell kit

GTR32072 - Corrected and highly detailed Vertical fin with separate rudder and detailed cooling intake. Fits the trumpeter and Hobby Boss F-105D kit and can also be used if making a F-105B conversion

GTR32073 - A necessary fix for the badly undersized fin on the Trumpeter F-105G kit. This set features a Vertical fin with the correct chord and ECM node placement, Separate rudder, and Cooling intake. Used if you are building a F-105G or backdating...

GTR32074 - Correction set to fix the badly shaped nose not he Trumpeter F-105D and F-105G kits. The set also includes a correctly shaped Ventral fin and gives you three option for the under nose details. Set includes parts for a smooth nose on easy...

GTR32076. Detailed Canopy Trim to finish out the canopy frame. The Thud had a massive frame around the canopy moving section that is missing from the plastic kit.

GTR32077. Detailed Canopy Trim to finish out the canopy frames of both cockpits. The Thud had massive frames around the canopy moving sections that is missing from the plastic kit. This set adds those details for a greatly enhanced look.

Since half of the decals printed by all of the different companies for the 1/32 scale Trumpeter F-105G Kit are for the earlier F-105F, it only makes sense to make an easy set to build an F-105F. The F-105G kit comes with the later ALQ-101v3 ECM...

Smooth nose cone for the Tamiya F-4 C/D kit. Some aircraft involved in operation Bolo, including Col. Robin Olds mount are believed to have had smooth nose cones during the time period of Operation BOLO in January 1967.

IR-3200B Black Aero Rigging Medium (1/32~24) 45m Made of lycra - only material and rigging material made for 1/32~24 scale Aero model easy and quick to use. Diameter 0.135mm x 45m (145ft) Suitable for 1/32 scale Aero model

Used in every NATO aircraft with air-to-air refueling system The set includes turned aluminum part. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic part and drill a hole in the remaining...

The set includes turned brass Alfa Probe and Angle Of Attack probe. Fit to all models of F-14 in 1:32 scale.It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives.

The set includes turned brass Pitot Tube and Angle Of Attack probes. Fit to all models of F-16 in 1:32 scale. It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives.

The set includes turned brass Pitot Tube and Angle Of Attack probes. Fit to all models of Tornado in 1:32 scale. It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives.

The set includes turned brass Pitot Tube. Fit to Revell model It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives.

Used on nightfigthers Bf 110 and Ju 88

Used on Me 262, Ar 234

He-162 Salamander - armament and detail set (MG 151 barrel tips, nose gear indicator and Pitot Tube)

Me-163A Komet - armament set (MG 151 barrel tips) & Pitot Tube

For short nose version F-4 Phantoms (F-4B F-4C F-4D F-4J F-4N F-4S)Includes pitot tube, ram air inlet and AOA probe.

For long nose version F-4 Phantoms (F-4E F-4F F-4G F-4EJ RF-4B RF-4C RF-4E RF-4EJ)Includes pitot tube, ram air inlet and AOA probe.

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube

Includes one pitot tube