1:32 Scale - Post WW2

Fully engraved panel lines Detailed cockpit interior and landing gear compartment Includes under-wing weaponry

The Direct Action Penetrator (DAP) is one of the most awesome airborne weapon platforms the US Army Special Operation Forces operate. As the ground troops carry out their missions, they feel relieved knowing that the DAP is in the sky, providing armed...

Bristling with armament, Academy�??s MH-60S boasts eight Hellfire missiles with clear target lenses, two, 19-shot rocket pods and two M2 .50 cal machine guns as well as an ammo canister. The model�??s interior has an accurate cargo compartment...

Cold War U.S. supersonic, medium-range, multirole combat aircraft. Its greatest advantage for survivability was its speed. Due to its oddly shaped nose the F-111 was nicknamed Aardvark. The wings were straight for take-offs, landings or slow speed...

Accurately detailed cockpit and landing gear Various air-to-air weapons Some metal parts Contains seven marking options including USAF, ROKAF, and JASDF Highly detailed TISEO and various antennas 7 markings options: USAF The 388th TFW 469th TFS F-4E...

  This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

This is a limited edition resin model kit. For advanced modelers.

The widespread use of multi-purpose helicopters in Vietnam to provide fire support of ground units was the reason for the development of a specialized attack helicopter. Bell began its development in the spring of 1965, and in September, the first...

The AH-1G Cobra attack helicopter was developed by company Bell as part of the program to create a specialized attack helicopter. In the fall of 1967, it began to be used in Vietnam, where demonstrated its high combat qualities. To defeat ground...

The CH-54A heavy helicopter was successfully used by the US Army in Vietnam during the war. It carried a variety of weapons, ammunition, and vehicles including excavators, bulldozers, trucks, and boats. In addition to carrying combat equipment, the...

The CH-54A heavy helicopters in Vietnam were mainly used for transport and occasionally for carrying the M-121 high explosive bombs. These bombs were modified with an extended nose fuze to detonate about 3 feet above the ground, effectively clearing...

Created in 1962, the heavy helicopter CH-54 Tarhe was primarily designed for transporting oversized military cargo. The powerful crane winches of the helicopter allowed it to lift loads in a hovering mode, without the need for landing. The helicopter...

The M8A1 steel plates, developed by the US Army Corps of Engineers, were primarily used for the quick construction of temporary runways. These plates were extensively used during the Vietnam War in the late 1960s and early 1970s, particularly in army...

The heavy-lift helicopter CH-54 Tarhe, created in 1962, was designed for transporting large military cargo. To enhance its transport capabilities, a special container was developed, which functioned as a transport capsule, allowing the transport of...

100% NEW MOULD - SUPER DECALS SHEET FOR 6 VERSIONS - PHOTO ETCHED PARTS - COLOURED INSTRUCTION SHEET AND NEW STICKERS MASKS SHEET CTOL Version (Conventional Take Off and Landing) The JSF Joint Strike Fighter program was set up to develop a...

FULLY UPGRADED MOULDS FINELY ENGRAVED RECESSED PANEL LINES AND RIVETS - FULLY DETAILED ENGINE , COCKPIT , AND AVIONICS BAY - OPEN OR CLOSED AIR BRAKES - 2 HUGE DECALS SHEETS FOR 8 VERSIONS - INSTUCTIONS SHEET WITH COLOR PROFILES (8x4 plates) - 390...

NEW MOULDS - SUPER DECALS SHEETS FOR 6 VERSIONS - COLOR INSTRUCTIONS SHEET - PHOTO ETCHED FRET INCLUDED The Dassault Mirage III is a reference point of the French aircraft production. It has been produced from the early sixties to provide to Arm??e...

TOP KIT 100% NEW MOULDS - 361 parts - Photo-etched details - Removable RB199 engine with support trolley - Retracted or extended flaps and slats - Movable ailerons - Openable radome and fully detailed radars - Open or closed thrust reversers -...

ITALIAN AIR FORCE ORPHEUS RECON POD - BULGED COVER FOR RECON PHOTO SYSTEM - 2 ALE 40 CHAFFS DISPENSERS - FINELY ENGRAVED RECESSED PANEL LINES AND RIVETS - FULLY DETAILED ENGINE , COCKPIT , AND AVIONICS BAY - FULLY DETAILED GUN BAY WITH COMPLETE...

- FINELY ENGRAVED RECESSED PANEL LINES AND RIVETS - FULLY DETAILED ENGINE , COCKPIT , AND AVIONICS BAY - GUN BAY WITH FULLY DETAILED M61 GUN - OPEN OR CLOSED AIR BRAKES - PHOTO-ETCHED FRET - MORE THAN 300 PARTS - HUGE DECALS SHEETS FOR 6 VERSIONS...

  NEW PARTS - 350 parts - Photo-etched details - Removable RB199 engine with support trolley - Retracted or extended flaps and slats - Movable ailerons - Openable radome and fully detailed radars - Open or closed thrust reversers - Open or closed...

100% NEW MOULDS Super-detailed cockpit with 3D decals - Finely detailed engine and nose gun bay - Detailed landing gear with optionals wells covers - PE parts for engine, flaps, cockpit and overall detailing - Realistic panel lines and rivets - Moveable...

NEW PARTS - 350 parts - Photo-etched details - Removable RB199 engine with support trolley - Retracted or extended flaps and slats - Movable ailerons - Openable radome and fully detailed radars - Open or closed thrust reversers - Open or closed air...

This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

Marking included: RF-4C Phantom II of the 117th Reconnaissance Wing, Birmingham Recce Rebels, Alabama ANG 35th Anniversary Special Paint Scheme Base kit:  Revell of Germany RF-4C

This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately.

Overview Skill Level 3 Scale: 1/32 Length: 23-9/10" Height: 6-1/8" Wingspan: 14-1/2" Parts: 328 Description Search and destroySuppressing enemy air defenses is a crucial, highly demanding, and highly dangerous mission. It amounts, ...

Marking options: - FBT337G Lynx , #Sqn RhAF, late 1979 - FBT337G Lynx , #Sqn of Zimbabwe Air Force, October 1981 - FBT337G Lynx , Air Force of Zimbabwe , late 1982

  The F / A-18 Super Hornet has replaced the legendary F-14 in the US Navy as a carrier-based fighter aircraft. Like the Tomcat the "F" model has a two-seater cockpit in which a weapons system officer sits behind the pilot and is responsible...

The Hawk is a proven jet trainer that has been in service with many air forces around the world for decades. in larger numbers in service with many air forces around the world. The Royal Air Force uses the T2 advanced trainer, which already has the same...

A replica model of the Tornado GR.1, a swing wing ground attack combat aircraft. This version was deployed by the RAF. Its baptism of fire came in 1991 during the Gulf War. - 4 Multi-function bombs- 2 Laser guided bombs- 1 ECM pod (Sky Shadow)- 2...

The BO105 is the most successful helicopter design in the light utility class. Due to its agility it is suitable for many military uses. Thus in the 70's the German Army also received a liaison and reconnaissance version in addition to the anti-tank...

Model of the famous Tornado ECR in its Tiger Meet 2014 livery of TkLwG 52 stationed in Schleswig Jagel.- ECR attachments- 2 HARM guided missiles- 2 Sidewinder guided missiles- 2 auxiliary fuel tanks- Detailed cockpit including instrument panels- 2...

The 1/32 ICM AH-1G Cobra is a very nice kit indeed and here we have made it even much more detailed by the addition of extra large number of resin parts, photo-etches and 3D printer-produced parts. All of these turn the ICM kit into a superbly detailed...

The T-2 Buckeye jet trainer is no doubt among the very legends of the US naval aviation. Both the US Navy and Marines operated this type for a very long time whilst in Greece, the Buckeye saw service even longer. Besides the standard white and red...

PE & clear parts included 3 types of markings Figure is NOT included This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately.

This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

US Navy fighter with single piece (seamless) fuselage section. Provided with missiles and die-cast undercarriage struts.

US Marines fighter/bomber with single piece (seamless) fuselage section. Provided with missiles and die-cast undercarriage struts.

1/32 scale, total length 600, total width 404mm. The popular F-15E Strike Eagle (item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the...

Tamiya is proud to present the 1/32 Scale Grumman F-14A Tomcat "Black Knights". The F-14A Tomcat is still one of the most efficient fighter-bombers in the world. Since its first flight in 1970, the F-14 underwent various improvements. Tamiya now provides...

Model represents the F-16CJ (Block 50) as used for USAF SEAD Wild Weasel missions. First ever 1/32 scale F-16 model replicating General Electric engine and Big Mouth intake. Tamiya's most detailed 1/32 scale jet fighter ever. General Electric...

The McDonnell Douglas AV-8B Harrier II is a family of second-generation vertical/short takeoff and landing or V/STOL ground-attack aircraft of the late 20th century. It is primarily used for light attack or multi-role tasks, typically oper ated from...

Kit includes metal landing gear, PE parts and film instrument panels. Completed model will be over 17 inches long. Markings included: VA-82 CVW-8, USS Nimitz 1978 VA-192 CVW-11, USS Kitty Hawk Keyword: A-7

The first F-100 was delivered to the USAF in 1953, becoming the first fighter to break the sound barrier with a world record of 755 mph. Having been delivered near the end of the Korean War, the F-100 was used extensively in Vietnam. The "D" version of...

Kit includes metal landing gear and flap shaft, PE parts and film instrument panels. Completed model will be 21 inches long. Markings included: * Russian Air Force 'Blue #156'

Kit includes metal landing gear and flap shaft, PE parts and film instrument panels. Completed model will be 21 inches long. Markings included: * Russian Navy #311 * Russion Navy #312

The A-7D is a single-seat, tactical close air support aircraft. Although designed primarily as a ground attack aircraft, it also has limited air-to-air combat capability. It was derived from the basic A-7 originally developed by LTV for the U.S. Navy...

The Douglas A-1 Skyradier were designed as the new generation torpedo/bomber.Following the plan were changed for the end of the war,the Navy apply the Skyradier as a new attacker for the outstanding performance in the strike missions.The AD-4 is the...