Trumpeter

Includes PE and metal parts.

* Markings included for Bf 109G-10, "Black", of Stab I./JG3, CO Oblt. Seidl * Includes metal and PE parts

Item #2408

Item #2407 contains 272 pieces and includes metal PE parts. Finished model measures: Length:376 mm Wingspan: 411 mm. Markings included: Bf109G-6/R3 4./JG51 Flown by Ltn.Elias Kuhlein 1943 Yugoslavia

Item #2406

The GAZ-67 was a further development of the earlier GAZ-64. A main improvement was a wider track of 1446 mm. It also had a strengthened chassis frame, enlarged fuel tank and other improvements. It...

The 85-mm divisional gun D-44 was a Soviet divisional 85-mm calibre field artillery gun used after World War II. It was designed as the replacement for the 76 mm divisional gun M1942 (ZiS-3). The...

152 mm gun M1935 (Br-2) was a Soviet 152.4 mm heavy gun, produced in limited numbers in late 1930s. The most unusual feature of the gun was its tracked carriage, shared by a number of Soviet heavy...

The NKL-16 was an aerosan introduced by the Soviet Union during the World War II, based on the earlier NKL-6 . It was made of plywood, powered by an M-11G aircraft engine. During WWII, improved...

The Type 59 is a copy of the Soviet field gun M-46 M1954. It was a manually loaded, towed 130mm artillery piece, manufactured in the Soviet Union in the 1950s. The M46 had the longest range of any...

The D-74 122mm was developed in the late 1950s, and provided direct/indirect fire for the Soviet Army. Today it is in reserve units with the Russian Army. Kit consists of over 240 parts including...

The D-30, or 122-mm howitzer D-30 (GRAU index 2A18), is a Soviet howitzer that first entered service in the 1960s. It is a relatively light and handy weapon despite being heavy enough for...

The UAZ-469 is an all-terrain vehicle manufactured by UAZ. It was used by the Red Army and other Warsaw Pact forces, as well as paramilitary units in Eastern Bloc countries. In the Soviet Union, it...

The 152 mm howitzer-gun M1937 (ML-20) was a Soviet gun-howitzer. The gun was developed by the design bureau of the plant no 172, headed by F. F. Petrov, as a deep upgrade of the 152-mm gun M1910/34,...

The RF-8 was a completely different design than the heavily armored NKL-26 variant. It was a two seat, open-cockpit design which was very lightly armored, carrying a gun only in its nose, and was...

The BJ212 is a 1/2-ton 4x4 utility vehicle introduced in 1965 and was developed as a joint project with the Soviet Union.The Type 63 (12-round) Rocket Launcher is mounted on a rubber-tire split pole...

The late variant had several upgrades to the M198. The improvements included an added automated lifting system to tie into the existing system, hydraulic pump, filter, solenoid box, a reel for...

This gun resulted from a modernization of the WWI 152mm howitzer M1910. Work on modernizing the gun started in 1936. The gun was rechambered for larger cartridge and some pieces also had their wooden...

The 17cm Kanone 18 heavy gun proved to be an excellent weapon after the start of the war and in 1942 it replaced the Morser 18 gun on the production line. Captured K18's were used by the Allies on...

This was a German anti-tank gun used during World War II. It was designed as a result of experiences on the Eastern front in 1943, where the German army had encountered the Russian 122mm guns and had...

The 88mm gun (?Eighty-Eight?) was a German Anti-Aircraft and Anti-Tank artillery gun from World War II. They were widely used, and could be found on almost every battlefield, making it one of the...

There are 264 parts in light grey plastic , 2 thick rubber rims Markings for German army in field grey camouflage Also includes 4 rubber rims, 2 brass tubes, aluminum gun barrel and metal tow chain...

Metal parts included: brass tube, turned aluminum gun barrel, chain

The M198 is a medium-sized, towed artillery piece. It can be dropped by parachute or transported by a CH-53E Super Stallion. It is deployed in separate corps- and armylevel field artillery units, as...

The second major redesign of Bf109 is the F series. The "Friedrich" saw a complete redesign of the wings, the cooling system and fuselage aerodynamics, and was powered by the 1,175 PS DB 601N (F-1,...

This variant was a complete Bf-109 makeover, including a redesign of the wings, the cooling system, fuselage aerodynamics and a new engine. The F series abandoned the wing cannon and placed all...

The E-7 was a long range fighter derived from the E-4/N. Like that aircraft it had the DB 601N engine, two MG-17 machine guns in the engine cowling and two MG/FF cannon in the wings. However, it...

First produced in 1938, the E-variant included a more powerful Daimler Benz engine, yielding significantly more horsepower. The E-3 was a further improvement on the basic E, with some structural...

The 'Plus' is the newest variant of the AV-8B. It is a multi-mission, short takeoff vertical landing tactical strike aircraft. It includes air-to-air and air-to-surface weapons systems and 3rd...

The night fighter variant of the Harrier included a Navigation Forward Looking Infrared camera (NAVFLIR), upgraded cockpit including compatibility with night vision goggles and a more powerful Rolls...

When England decided to take delivery of the US P51 B/C Fighter, the RAF designated it the Mustang III. The British replaced the original framed hinged hood with a bulged frameless canopy that slid...

The Eurofighter is a single-seat, twinengine, agile combat aircraft for use in air-to-air, air-to-ground and tactical reconnaissance roles. The design of the Eurofighter Typhoon optimizes air...

This is a single-seat, twin-engine ground attack aircraft developed in the Soviet Union. It was designed to provide close air support for the Soviet Ground Forces and was heavily armed with one twin...

This is the 2-seat trainer variant of the previously-released single seat A variant. Kit consists of 508 parts on 20 sprues plus photo etched safety harnesses, rubber tires, retractable refueling...

This long-awaited kit is finally coming! The A-4 is a carrier-capable ground-attack aircraft designed for the US Navy and US Marine Corps. It was designed in response to a US Navy call for a...

The ‹¨«‹¨«‹¨«J‹¨«‹¨«‹¨« variant was basically an upgraded F-8E, similar to the F-8D, but with wing modifications, "wet" pylons for carrying external 300 lb drop fuel tanks and a new and more powerful...

  Kit consists of 356 parts on 12 sprues with photo etched safety harnesses and turbofan. Additional features: Very detailed J57 turbojet engine Detailed machine gun compartment with door...

This huge kit is the same as # 2224, but with new tooling added: an extended upper fuselage, a longer clear canopy, a two seat cockpit and modified left and right air intakes. Kit consists of 445...

The SU-30 is an updated modification of the Su-27 and was jointly developed by Russia & China. It is a heavy class, long-range, multirole, air superiority fighter and strike fighter. The MKK is...

The A-4 Skyhawk was designed by Douglas in response to a U.S. Navy call for a jet-powered attack aircraft to replace the older A-1 Skyraider. Douglas opted for a design that would minimize its...

The F variant, US Navy carrier based ground attacker, was a refinement of A-4E with extra avionics housed in a hump on the fuselage spine and a more powerful J52-P-8A engine. Some served with Blue...

This variant of the P-47D featured the added dorsal fin, an extension in the form of a narrow triangle running from the vertical tail to the radio aerial on the top of the fuselage, allowing for...

Kit Consists of 374 parts on 10 sprues, plus photo etched parts and markings for No 15 VF(N)-107 1944 & No 59 VMF(N)-541 1945. Includes also is an optional clear engine cover as well as...

The US needed a nighttime fighter to fend off nocturnal Japanese raids on US ships. This variant of the Hellcat had an APS-6 radar system installed, an IFF transponder, a flat windscreen that...

The Hellcat proved to be the most successful aircraft in naval history, destroying 5,163 aircraft in service with the US Navy and US Marine Corps, plus 52 with the Royal Navy's Fleet Air Arm during...

The Grumman F6F Hellcat is a fighter descended from the earlier F4F Wildcat, but was a completely new design. The Hellcat proved to be the most successful aircraft in naval history, destroying 5,171...

The early version of the Wildcat used R1830-90 Twin Wasp engines adding an intake scoop on the upper cowling. Kit consists of 267 parts on 7 sprues, plus photo etch parts and a film instrument...

The Douglas A-1 Skyradier were designed as the new generation torpedo/bomber.Following the plan were changed for the end of the war,the Navy apply the Skyradier as a new attacker for the outstanding...

The Douglas A-1 Skyradier were designed as the new generation torpedo/bomber.Following the plan were changed for the end of the war,the Navy apply the Skyradier as a new attacker for the outstanding...

Kit includes 257 parts on 17 sprues, photo-etch and film parts and markings for S-9 of the USS Yorktown, June 1942 & B-10 of VB-3 of the USS Yorktown, June 1942.

Kit consists of 366 parts on 15 sprues, 2 rubber tires, clear engine cowling, PE parts. Completed model measures over 10 inches long with a 13 inch wingspan Markings for: No 100/95320 of VF-19...

The A-7D is a single-seat, tactical close air support aircraft. Although designed primarily as a ground attack aircraft, it also has limited air-to-air combat capability. It was derived from the...

Kit consists of 257 parts on 16 sprues, PE parts and film instrument panel. Markings are for VS-2 of USS Lexington (May 1942), VC-22 of USS Independence (1943), and A-24A US Army.

Item #2243 - Kit consists of 250 parts on 14 sprues plus a photo etched part and a film instrument panel. Markings are for White 45 of VB-16, USS Lexington 1943 for the Navy version and 42-54676 for...

Kit consists of: 227 parts on 14 sprues Film instrument panel Markings are for VMB-2 of Marine Air Group 11 White 1 (SBD-1); and VMSB-231 (SBD-2).

The Nanchang CJ-6 is a Chinese license-built version of the Russian Yak-18A. This great war bird has been used by many of the former Soviet and Communist Bloc Countries for training their military...

Kit includes metal landing gear and flap shaft, PE parts and film instrument panels. Completed model will be 21 inches long. Markings included: * Russian Navy #311 * Russion Navy #312

Kit includes metal landing gear and flap shaft, PE parts and film instrument panels. Completed model will be 21 inches long. Markings included: * Russian Air Force 'Blue #156'

Kit consists of 492 injection molded plastic parts on 17 sprues plus a clear rotating gun turret, rubber tires, metal aileron & flap shaft, photo etched aileron & flap hinges, engine ventilation...