GT Resin

The New 1/32 Scale intake set is the first of the “Basic” line of intakes in the larger scale. These intakes provide the following features easing your build time and eliminating those...

Includes parts to build two seats.

Set completes the prominent details Meng missed on their F-4G Wild weasel kit. Included in the set are:- Lower fuselage low band antenna with backing plate- Vertical fin low band antenna for each...

  One piece to fit the new F-4E and F-4G Phantom kits from Meng. These drop in fit of the kit part assembly and save hours of filling and painting of the kit parts. The Intakes are cast in...

  The Meng F-4G is a fabulous kit, but Meng missed a few key elements that all F-4G;s carried. One item is the belly Strap used to strengthen the wings with the addition of the leading edge...

Seamless Resin Intakes for the fantastic Mini Base 1/48 Scale SU-33 kit. These intakes are designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install...

Seamless Resin Intakes for the fantastic Mini Base 1/48 Scale SU-27K kit. These intakes are designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install...

Seamless Resin Intakes for the Great Wall Hobby 1/48 Scale SU-30SM kit. These intakes are designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install...

Seamless Resin Intakes for the Great Wall Hobby 1/48 Scale SU-35kit. These intakes are designed to replace the two piece plastic parts that are hard to assemble with a simple, easy to install...

Seamless Resin Intakes for the Great Wall Hobby 1/48 Scale SU-27 kits. These intakes fit both the single seat and two seat kits. Designed to replace the two piece plastic parts that are hard to...

Set of 4 Highly detailed LAU-129 Missile Launch Rails to upgrade the Tamiya F-16CJ kit. These rails are resin cast to fit the wing end stations and the underwing pylons used to mount AARAM and...

>>>> GTR48053 F-14 Basic Intakes for Tamiya 1/48 F-14 Kits • Simple to install seamless intakes for the fantastic Tamiya F-14A & D Kits

>>>>> GTR48052 F-15 Corrected Intake Set for Great Wall Hobby Kits Correctly shipped and highly detailed intake/fan set for the Great Wall 1/48 F-15 kits. The set will fit all and...

• Highly detailed inner and outer splitter plates replicating that of the real aircraft• Highly detailed J-79 fans. One set of USN and one set of USAF with Cartridge Starter fan...

SEAMLESS Intake Ducts for “NEW Line of TAMIYA F-4 Phantom kits.”These are designed to be a drop in fit replacing the kit parts eliminating the need to fill and sand the intakes to remove...

GT Resin's latest product is seamless intakes for the new tool Hobby Boss F/A-18 E/F Super Hornet and EA-18G Growler kits in 1/48 scale. The intakes are a drop-in installation saving hours of...

USN style inner wing pylons with missile rails. The Bolo F-4C’s carried this pylon/missile rail set up during that time, as the rounded USAF style pylons were just bing introduced and not yet...

Smooth nose cone for the Tamiya F-4 C/D kit. Some aircraft involved in operation Bolo, including Col. Robin Olds mount are believed to have had smooth nose cones during the time period of Operation...

One piece seamless intakes for the new Meng 1/48 F/A-18E Super Hornet kit. The set contains right and left seem less intakes cast in white resin, and two engine fan diffusers, used to hide the fan...

Set features ƒ??Good Yearƒ? brand tires used on many of the Eagles with separate, no mask wheels and tires, and brake drum specifically for the Revell Kit. Tires and wheels are designed with...

Highly detailed PW 100/220 F-15 A-D engine set. Fits Tamiya and Revell 1/32 F-15 kits.

32010 1/32 F-15 A/B/C/D Engines Set for Tamiya F-15 C & J Kits.The highly detailed set comes with parts to build either the Early PW 100 used in the A/B models or the PW 220 used in the C/D/J...

A highly detailed upgrade for Revell Phantoms in 1/32 Scale. The Exhausts fit the F-4 E/F/G and RF-4E kits and feature accurate Nozzles, burner tubes, and rear engine face.

For the Trumpeter kit The finest A-10 engine set made for the 1/32 Trumpeter A-10 kits. Made using input from GE Corporation using the latest in 3D printing technology. Easy to install item...

Highly detailed 1/32 J-79 engine set with long nozzles for Tamiya F-4 E,EJ, and J kits. Highly detailed and sized correctly to fit the Tamiya kit. A real upgrade over the undersized kit parts.

Highly detailed 1/32 J-79 Engine set for Tamiya F-4 C/D kit and Revell RF-4C kits. These short exhaust cans are correctly sized and a must for either kit build.

Resin seamless intakes to fit the Revell kits.

Resin seamless intakes to fit the Tamiya kits.

For the Tamiya kit Resin seamless intakes to fit the Tamiya F4J kits. The set includes a highly detailed splitter plate that is separate from the intake to ease painting of the model. ...

1/48 scale highly detailed under wing belly strap and reinforcing plates used on F-4E,G,S and FG.1/FGR.2 Phantoms. Shown in the second picture is the Hasegawa bottom wing. It also fits all...

Seamless intake set for the Revell 1/48 Scale F-15E Strike Eagle kit. Set is a drop in replacement for the kit parts with only minor work to the lower fuselage required to eliminate all...

Full Seamless Intake Set for the Hasegawa A-7 Corsair II kits. The set contains:‹¨«?‹¨« Full seamless intakes cast in white resin, ‹¨«?‹¨« Accurate Engine fan face ‹¨«?‹¨« Highly detailed...

Finally, Full Seamless Intakes for 1/48 Hobby Boss F/A-18 A-D Legacy Hornet kits. As modelers know, the HB line of Legacy Hornets lacks full length intakes. GT Resinƒ??s Seamless intake solves...

Full Seamless Intake & Correction Set for the Hobby Boss A-7 Corsair II kits. The set contains:‹¨«?‹¨« Correctly profiled Engine air intake‹¨«?‹¨« Full seamless intake cast in white resin,...

Full Seamless Intake Set for the Hasegawa F-8 Crusader kits. The set contains:‹¨«?‹¨« Full seamless intakes cast in white resin, ‹¨«?‹¨« Accurate J57 Engine fan face ‹¨«?‹¨« Highly detailed...

Full Seamless Intake Set for the Hasegawa British 1/48 FG.1 and FGR.2 ( F-4 K/M) Phantom kits. The set contains:‹¨«?‹¨« Full seamless intakes cast in white resin, ‹¨«?‹¨« Highly detailed...

The besides the Cannon, the large twin engines are the focal point of any A-10 model. Made from actual General Electric TF-34 drawings, our resin upgrade set is a must for any A-10 build. Made for...

Seamless intakes for the Hasegawa F/A-18 E/F and EA-18G kits. Simple, basic drop in installation. The intakes line up at the color demarkation line simplifying painting and duplicating the real...

Finally, a simple solution to those hard to finish intakes. These GT Resin F/A-18 E/F & EA-18G for the Hasegawa kits greatly simplify your build while giving you the true look of the real...

Resin seamless Intakes for the Hasegawa F/A-18A,B,C,D 1/48 Scale Legacy Hornet Kits. Finally, drop in seamless intakes and fan faces for an easy, cost effective solution for detailing these...

GT Resin Seamless Intakes for 1/48 Kinetic F/A-18 A-D & CF-188A-D Legacy Hornet kits. Our unique, drop in fit seamless intakes replace the three part kit assembly that is impossibly difficult...

Highly detailed 1/48 Intake-Engine Fan Set for the Kinetic A-6 and EA-6 kits. These intake give you the accurate look of the real aircraft with respect to the intake geometry and how the...

For the HobbyBoss kit

Full seamless intake set for the Hasegawa 1/48 scale F-2 A & B kits. The set replaces the hard to assemble intake parts that require much seam filling and sanding with high quality seamless parts. ...

Full NSI intake set for the Hasegawa 1/48 scale F-16 series. As asked for by Modelers, finally a cost effective full intake set. Our set includes one piece seamless lower intake, rear intake tube...

Finally, full intake conversion set for 1/48 scale Hasegawa F-16 kits. The set features MCID intake with both front and rear section, Detailed Fan face for GE engine, and detailed installation...

Finally, a simple solution to those ill-fitting Kinetic F-16 intakes that never seem to come out looking good. These highly detailed seamless intakes are the solution as they greatly enhance...

Finally, a simple solution to those ill-fitting Kinetic F-16 intakes that never seem to come out looking good. These highly detailed seamless intakes are the solution as they greatly enhance...

For the Tamiya kit For Blocks 5/10/15/20/25/32 For earlier models PW engine with Light Weight main gear ‹¨«?‹¨« Installation of the MCID Intake comprises of the resin intake & intake...

For the Tamiya kit For Blocks 32/42/52/62 earlier refits that use the PW engine with Heavy Weight main gear ‹¨«?‹¨« Installation of the MCID Intake comprises of the resin intake & intake...

For the Tamiya kit ‹¨«?‹¨« Installation of the MCID Intake comprises of the resin intake & intake lip & Instructions. ‹¨«?‹¨« Intake is a Drop in fit and replaces the plastic intake...

1/48 scale ALQ-119. ECM Pod. Used on US and allied modern jets form 70's through Desert Storm

GT Rsein's large scale A-10 fan and intake set down sized to fit the 1/48 Hobby Boss A-10 model kit. Designed with the help of GE Aircraft engines, the fan is an accurate model of the real...

1/48 scale conversion set to convert the Academy/Eduard F-4C kits into a Wild Weasel attacker. The set includes: ‹¨«?‹¨« NEW. Strike camera insert for forward fuselage bottom replaces the...

1/48 scale conversion set to convert the Zoukei-Mura F-4C kits into a Wild Weasel attacker. The set includes: ‹¨«?‹¨« NEW. Strike camera insert for forward fuselage bottom t ‹¨«?‹¨« ...

Highly detailed replacement nozzles to dress up the back of your Zoukei- Mura Phantom. Also fit Academy kits as well.

For the Hasegawa kit For advanced modellers only. NOTE - cutting the kit parts will be required to install these intakes.

For the Academy/Eduard kit Fit all Academy and Eduard F-4 Phantom kits. Our Seamless intakes replace the multipart kit intakes. In addition, the intake set comes with a two part detailed...

For the Zoukei-Mura kit Seamless intakes to replace the multipart kit intakes. In addition, the intake set comes with a two part detailed splitter plate to facilitate easy painting and adding...

Kit nozzles are on the left while the GT Resin nozzles are on the right. For the Zoukei-Mura kit 1/48 scale detailed replacement nozzles for Zoukei-Mura F-4J/S. These are direct replacements for...

1/32 Scale F-4D Phantom cockpit resin set for Tamiya F-4C/D kit. Set features :ƒ?› Highly detailed tub for the ƒ??Dƒ? Phantom that is easy to finish and install and bulkheads in their correct...

1/32 Scale F-4C Phantom cockpit resin set for Tamiya F-4C/D kit. Set features :ƒ?› Highly detailed tub for the ƒ??Cƒ? Phantom that is easy to finish and install and bulkheads in their...

Includes parts to build two seats.

1/32 Scale F-4C Phantom cockpit resin set for Tamiya F-4C/D kit. Set features :ƒ?› Highly detailed tub for the ƒ??Cƒ? Phantom that is easy to finish and install and bulkheads in their correct...

Finally , a new and revised 1/32 Scale intake set for the Hasegawa F-16 kits. The intake is the NSI (Small Mouth) intake, and comes virtually ready to paint and install. This new...

Set features the Michelin ƒ??Aviatorƒ? brand tires used on many of the Eagles with separate, no mask wheels and tires, and brake drum specifically for the Revell Kit. Tires and wheels are...

Full Seamless Intake with Detailed Wheel Well Set for 1/32 Trumpeter F-8 Crusader kits. The set contains:‹¨«?‹¨« Correctly profiled Engine air intake‹¨«?‹¨« Full seamless intake cast in white...

Highly detailed intake FOD plugs for 1/32 scale F-15. These fit all Tamiya and Revell 1/32 scale F-15 kits

GTR 32083 is a 1/32 Scale resin cockpit set for the Revell RF-4C Kits. The set is made for the US late version that has the side stick radar controller and ARN-101 capability. Included...

Highly detailed exhaust nozzle for the 1/32 Italeri F-104 kits. Part is a direct replacement for the plastic kit nozzle and installs in the same manner as the kit plastic parts�??.for a drop in...

Highly detailed exhaust nozzle for the 1/32 Italeri F-104 kits. Part is a direct replacement for the plastic kit nozzle and installs in the same manner as the kit plastic parts�??.for a drop in...

The set contains the nose gear shimmy dampener used on all Strike Eagles, as well as both large and small hole Wheels. Made to fit the Tamiya F-15E and Bunker Buster Kits. Two Shimmy Dampeners...

Since half of the decals printed by all of the different companies for the 1/32 scale Trumpeter F-105G Kit are for the earlier F-105F, it only makes sense to make an easy set to build an...

GTR32077. Detailed Canopy Trim to finish out the canopy frames of both cockpits. The Thud had massive frames around the canopy moving sections that is missing from the plastic kit. This set adds...

GTR32075 - Detailed Exhaust nozzle for Trumpeter and Hobby Boss F-105 kits. Part feature a seamless interior that used the Kit burner flame holder. IT eliminates the separate parts and their...

GTR32076. Detailed Canopy Trim to finish out the canopy frame. The Thud had a massive frame around the canopy moving section that is missing from the plastic kit.

GTR32074 - Correction set to fix the badly shaped nose not he Trumpeter F-105D and F-105G kits. The set also includes a correctly shaped Ventral fin and gives you three option for the under nose...

GTR32073 - A necessary fix for the badly undersized fin on the Trumpeter F-105G kit. This set features a Vertical fin with the correct chord and ECM node placement, Separate rudder, and Cooling...

GTR32072 - Corrected and highly detailed Vertical fin with separate rudder and detailed cooling intake. Fits the trumpeter and Hobby Boss F-105D kit and can also be used if making a F-105B...

Limited edition cockpit set GTR32071 for the Revell F-4G Wild Weasel kits. Includes: - Highly detailed tub with correct rear bulkhead and detailed rear deck - Highly detailed Mk 7 seats...

1/32 Scale F-4E/F/G Slatted wing upgrade - Also fit the RF-4C?E kits if building the Greek Slatted wing Recce! The Set is the finest slat wing kit ever offered for upgrading the Revell F-4E/F/G ...

For the Revell kit

The early McDonnell Douglas F-4 Wing Drop Tank Set is made for the Tamiya and Revell F-4 and RF-4 Phantom kits. These are the original styled tanks used on the Phantoms and Never before...

Set includes parts to build one drop tank

Original Old Style Center Line Drop Tank for 1/32 scale F-4 Phantom kits. Tank is a necessary extra when building the Tamiya F-4C/D kit as this kit does not come with a Centerline drop tank, but most...

GTR32061 is a seamless NSI intake for the Tamiya F-16CJ kits. Referred to the "Small Mouth Intake" IT replaces a multiple part Tamiya assembly with an easy to install seamless intake. The...