Trumpeter

This is an unassembled plastic model kit. Assembly and painting required. Paint and glue is not included and is sold separately. For ages 14 years old and up. NOT A TOY.

A member of the second generation of Russian aircraft designers and best known for fighter designs, Aleksandr S. Yakovlev always retained a light aircraft design section. In May, 1945 Yakovlev...

Continuing the Ju-87 releases, the G-2 variant was the last produced by the Germans and was deployed on the Eastern Front to combat advancing Soviet tanks. The extension of its wings differentiated...

A long range version of the Ju 87 B was also built, known as the Ju 87 R. They were primarily intended for anti-shipping missions. The Ju 87R had a B-series airframe with an additional oil tank and...

The Ju 87 B series was to be the first mass-produced variant. A total of six pre-production Ju 87 B-0 were produced, built from Ju 87 A airframes. Test flights began from the summer of 1937. A...

>

The Fairey Swordfish was a torpedo bomber built by used by the Fleet Air Arm of the British Royal Navy during World War II. It was operated primarily as a fleet attack aircraft, however, during...

This latest variant of the Bf109 included a taller tail unit and redesigned rudder which improved stability at high speeds. Early in 1944, new engines with larger superchargers were added for...

The second major redesign of Bf109 is the F series. The "Friedrich" saw a complete redesign of the wings, the cooling system and fuselage aerodynamics, and was powered by the 1,175 PS DB 601N (F-1,...

This variant was a complete Bf-109 makeover, including a redesign of the wings, the cooling system, fuselage aerodynamics and a new engine. The F series abandoned the wing cannon and placed all...

The E-7 was a long range fighter derived from the E-4/N. Like that aircraft it had the DB 601N engine, two MG-17 machine guns in the engine cowling and two MG/FF cannon in the wings. However, it...

First produced in 1938, the E-variant included a more powerful Daimler Benz engine, yielding significantly more horsepower. The E-3 was a further improvement on the basic E, with some structural...

When England decided to take delivery of the US P51 B/C Fighter, the RAF designated it the Mustang III. The British replaced the original framed hinged hood with a bulged frameless canopy that slid...

Kit consists of 296 parts. Features: Clear fuselage option for interior detail viewing, detailed V-1650 12 cylinder engine, ducting, engine mount, engine accessory compartment all in full detail,...

Kit consists of 462 parts on 18 sprues plus photo etch, and 3 rubber tires. Clear engine cowl provided Gun bay open, flaps are positionable, and bombs included. Markings are for: 1)...

This variant of the P-47D featured the added dorsal fin, an extension in the form of a narrow triangle running from the vertical tail to the radio aerial on the top of the fuselage, allowing for...

Kit consists of 462 parts on 17 sprues plus photo etch, film and metal parts. Completed kit measures nearly 14" long with a wingspan of over 15". Markings are for "LM-C" Frederick Christensen,...

An additional variant of the previously issued Me-262A1a but with attached R4M rocket (newly tooled) and full fuel tanks. The R4M rocket, nicknamed the Orkan (German, meaning "Hurricane") due to...

Kit Consists of 374 parts on 10 sprues, plus photo etched parts and markings for No 15 VF(N)-107 1944 & No 59 VMF(N)-541 1945. Includes also is an optional clear engine cover as well as...

The P-47 was one of the most famous U.S. Army Air Force fighter planes in World War II. Although it was originally conceived as a lightweight interceptor, it became a heavy fighter-bomber. The...

The kit consists of 321 parts in grey plastic with an additional 4 rubber tires, 12 clear plastic parts for canopy.Markings included: Me 262 A-1a, red numerber 13 of Heinz Bar, III./EJG2. November...

The US needed a nighttime fighter to fend off nocturnal Japanese raids on US ships. This variant of the Hellcat had an APS-6 radar system installed, an IFF transponder, a flat windscreen that...

The Hellcat proved to be the most successful aircraft in naval history, destroying 5,163 aircraft in service with the US Navy and US Marine Corps, plus 52 with the Royal Navy's Fleet Air Arm during...

The Grumman F6F Hellcat is a fighter descended from the earlier F4F Wildcat, but was a completely new design. The Hellcat proved to be the most successful aircraft in naval history, destroying 5,171...

The early version of the Wildcat used R1830-90 Twin Wasp engines adding an intake scoop on the upper cowling. Kit consists of 267 parts on 7 sprues, plus photo etch parts and a film instrument...

Kit includes 257 parts on 17 sprues, photo-etch and film parts and markings for S-9 of the USS Yorktown, June 1942 & B-10 of VB-3 of the USS Yorktown, June 1942.

Kit consists of 366 parts on 15 sprues, 2 rubber tires, clear engine cowling, PE parts. Completed model measures over 10 inches long with a 13 inch wingspan Markings for: No 100/95320 of VF-19...

Kit consists of 257 parts on 16 sprues, PE parts and film instrument panel. Markings are for VS-2 of USS Lexington (May 1942), VC-22 of USS Independence (1943), and A-24A US Army.

Item #2243 - Kit consists of 250 parts on 14 sprues plus a photo etched part and a film instrument panel. Markings are for White 45 of VB-16, USS Lexington 1943 for the Navy version and 42-54676 for...

Kit consists of: 227 parts on 14 sprues Film instrument panel Markings are for VMB-2 of Marine Air Group 11 White 1 (SBD-1); and VMSB-231 (SBD-2).

The Nanchang CJ-6 is a Chinese license-built version of the Russian Yak-18A. This great war bird has been used by many of the former Soviet and Communist Bloc Countries for training their military...

Kit consists of 492 injection molded plastic parts on 17 sprues plus a clear rotating gun turret, rubber tires, metal aileron & flap shaft, photo etched aileron & flap hinges, engine ventilation...

Kit consists of 489 injection molded plastic parts on 17 sprues, plus a clear rotating gun turret, rubber tires, metal aileron and flap shaft, photo etched aileron and flap hinges, engine...

Includes metal Aileron & Flap shaft, photo-etched parts, full engine detail, ribber tires, and workable flap. Kit contains 362 parts. The P-38 was a radical change for American fighter aircraft...

Kit consists of 267 parts on 7 sprues, film instrument panel, clear engine cover. Markings for VMF-244 Guadalcanal 1942 and VF-6 on USS Enterprise, 1942. Completed kit measures nearly 11" long...