Trumpeter

Kit consists of 639 plastic parts plus photo etch and a film instrument panel. Markings are for No 115 Sqn RAF 1942 and No 425 Sqn RCAF North Yorkshire 1943. Completed kit measures over 15" long with...

The Thunderbirds were activated in 1953, and the F-100D Thunderbirds were a part of the USAF Air Demonstration Squadron, which was activated on February 13, 1967. By the end of the 1960?s, the...

Kit consists of 220 parts on 7 sprues plus a film instrument panel Markings for 3 variants: WN325 830th Sqn, HMS Eagle 1956, Suez Campaign WL879 813th Sqn, HMS Eagle 1958 WN335 831st Sqn, HMS Ark...

Markings included for: RVAH-5 USS America (CVA-66) RVAH-6 USS Nimitz (CVN-68).

The Vickers Wellington was armed with twin .330 machine guns in the nose and tail turrets. It also had 2 manually-operated .303 guns in the beam positions and could carry a 4,500 lb bomb load. Slow...

Kit consists of 233 parts, including 206 in plastic on 12 sprues, 3 rubber tires, PE seat belts and a film instrument panel. Also features postitional wing flaps, fully detailed engine &...

* Kit consists of 260 parts on 11 sprues plus a photo etched part and a film instrumental panel. * Markings for 257 Sqn England 1942 & 87 Sqn England 1942

Includes PE and metal parts.

* Markings included for Bf 109G-10, "Black", of Stab I./JG3, CO Oblt. Seidl * Includes metal and PE parts

Item #2408

Item #2407 contains 272 pieces and includes metal PE parts. Finished model measures: Length:376 mm Wingspan: 411 mm. Markings included: Bf109G-6/R3 4./JG51 Flown by Ltn.Elias Kuhlein 1943 Yugoslavia

Item #2406

This latest variant of the Bf109 included a taller tail unit and redesigned rudder which improved stability at high speeds. Early in 1944, new engines with larger superchargers were added for...

The second major redesign of Bf109 is the F series. The "Friedrich" saw a complete redesign of the wings, the cooling system and fuselage aerodynamics, and was powered by the 1,175 PS DB 601N (F-1,...

This variant was a complete Bf-109 makeover, including a redesign of the wings, the cooling system, fuselage aerodynamics and a new engine. The F series abandoned the wing cannon and placed all...

The E-7 was a long range fighter derived from the E-4/N. Like that aircraft it had the DB 601N engine, two MG-17 machine guns in the engine cowling and two MG/FF cannon in the wings. However, it...

First produced in 1938, the E-variant included a more powerful Daimler Benz engine, yielding significantly more horsepower. The E-3 was a further improvement on the basic E, with some structural...

The 'Plus' is the newest variant of the AV-8B. It is a multi-mission, short takeoff vertical landing tactical strike aircraft. It includes air-to-air and air-to-surface weapons systems and 3rd...

The night fighter variant of the Harrier included a Navigation Forward Looking Infrared camera (NAVFLIR), upgraded cockpit including compatibility with night vision goggles and a more powerful Rolls...

When England decided to take delivery of the US P51 B/C Fighter, the RAF designated it the Mustang III. The British replaced the original framed hinged hood with a bulged frameless canopy that slid...

The Eurofighter is a single-seat, twinengine, agile combat aircraft for use in air-to-air, air-to-ground and tactical reconnaissance roles. The design of the Eurofighter Typhoon optimizes air...

This is a single-seat, twin-engine ground attack aircraft developed in the Soviet Union. It was designed to provide close air support for the Soviet Ground Forces and was heavily armed with one twin...

This is the 2-seat trainer variant of the previously-released single seat A variant. Kit consists of 508 parts on 20 sprues plus photo etched safety harnesses, rubber tires, retractable refueling...

Kit consists of 296 parts. Features: Clear fuselage option for interior detail viewing, detailed V-1650 12 cylinder engine, ducting, engine mount, engine accessory compartment all in full detail,...

This long-awaited kit is finally coming! The A-4 is a carrier-capable ground-attack aircraft designed for the US Navy and US Marine Corps. It was designed in response to a US Navy call for a...

The ‹¨«‹¨«‹¨«J‹¨«‹¨«‹¨« variant was basically an upgraded F-8E, similar to the F-8D, but with wing modifications, "wet" pylons for carrying external 300 lb drop fuel tanks and a new and more powerful...

  Kit consists of 356 parts on 12 sprues with photo etched safety harnesses and turbofan. Additional features: Very detailed J57 turbojet engine Detailed machine gun compartment with door...

This huge kit is the same as # 2224, but with new tooling added: an extended upper fuselage, a longer clear canopy, a two seat cockpit and modified left and right air intakes. Kit consists of 445...

The SU-30 is an updated modification of the Su-27 and was jointly developed by Russia & China. It is a heavy class, long-range, multirole, air superiority fighter and strike fighter. The MKK is...

The A-4 Skyhawk was designed by Douglas in response to a U.S. Navy call for a jet-powered attack aircraft to replace the older A-1 Skyraider. Douglas opted for a design that would minimize its...

The F variant, US Navy carrier based ground attacker, was a refinement of A-4E with extra avionics housed in a hump on the fuselage spine and a more powerful J52-P-8A engine. Some served with Blue...

Kit consists of 462 parts on 18 sprues plus photo etch, and 3 rubber tires. Clear engine cowl provided Gun bay open, flaps are positionable, and bombs included. Markings are for: 1)...

This variant of the P-47D featured the added dorsal fin, an extension in the form of a narrow triangle running from the vertical tail to the radio aerial on the top of the fuselage, allowing for...

Kit consists of 462 parts on 17 sprues plus photo etch, film and metal parts. Completed kit measures nearly 14" long with a wingspan of over 15". Markings are for "LM-C" Frederick Christensen,...

An additional variant of the previously issued Me-262A1a but with attached R4M rocket (newly tooled) and full fuel tanks. The R4M rocket, nicknamed the Orkan (German, meaning "Hurricane") due to...

Kit Consists of 374 parts on 10 sprues, plus photo etched parts and markings for No 15 VF(N)-107 1944 & No 59 VMF(N)-541 1945. Includes also is an optional clear engine cover as well as...

The US needed a nighttime fighter to fend off nocturnal Japanese raids on US ships. This variant of the Hellcat had an APS-6 radar system installed, an IFF transponder, a flat windscreen that...

The Hellcat proved to be the most successful aircraft in naval history, destroying 5,163 aircraft in service with the US Navy and US Marine Corps, plus 52 with the Royal Navy's Fleet Air Arm during...

The Grumman F6F Hellcat is a fighter descended from the earlier F4F Wildcat, but was a completely new design. The Hellcat proved to be the most successful aircraft in naval history, destroying 5,171...

The early version of the Wildcat used R1830-90 Twin Wasp engines adding an intake scoop on the upper cowling. Kit consists of 267 parts on 7 sprues, plus photo etch parts and a film instrument...

The Douglas A-1 Skyradier were designed as the new generation torpedo/bomber.Following the plan were changed for the end of the war,the Navy apply the Skyradier as a new attacker for the outstanding...

The Douglas A-1 Skyradier were designed as the new generation torpedo/bomber.Following the plan were changed for the end of the war,the Navy apply the Skyradier as a new attacker for the outstanding...

Kit includes 257 parts on 17 sprues, photo-etch and film parts and markings for S-9 of the USS Yorktown, June 1942 & B-10 of VB-3 of the USS Yorktown, June 1942.

Kit consists of 366 parts on 15 sprues, 2 rubber tires, clear engine cowling, PE parts. Completed model measures over 10 inches long with a 13 inch wingspan Markings for: No 100/95320 of VF-19...

The A-7D is a single-seat, tactical close air support aircraft. Although designed primarily as a ground attack aircraft, it also has limited air-to-air combat capability. It was derived from the...

Kit consists of 257 parts on 16 sprues, PE parts and film instrument panel. Markings are for VS-2 of USS Lexington (May 1942), VC-22 of USS Independence (1943), and A-24A US Army.

Item #2243 - Kit consists of 250 parts on 14 sprues plus a photo etched part and a film instrument panel. Markings are for White 45 of VB-16, USS Lexington 1943 for the Navy version and 42-54676 for...

Kit consists of: 227 parts on 14 sprues Film instrument panel Markings are for VMB-2 of Marine Air Group 11 White 1 (SBD-1); and VMSB-231 (SBD-2).

The Nanchang CJ-6 is a Chinese license-built version of the Russian Yak-18A. This great war bird has been used by many of the former Soviet and Communist Bloc Countries for training their military...

Kit includes metal landing gear and flap shaft, PE parts and film instrument panels. Completed model will be 21 inches long. Markings included: * Russian Navy #311 * Russion Navy #312

Kit includes metal landing gear and flap shaft, PE parts and film instrument panels. Completed model will be 21 inches long. Markings included: * Russian Air Force 'Blue #156'

Kit consists of 492 injection molded plastic parts on 17 sprues plus a clear rotating gun turret, rubber tires, metal aileron & flap shaft, photo etched aileron & flap hinges, engine ventilation...

Kit consists of 489 injection molded plastic parts on 17 sprues, plus a clear rotating gun turret, rubber tires, metal aileron and flap shaft, photo etched aileron and flap hinges, engine...

The McDonnell Douglas AV-8B Harrier II is a family of second-generation vertical/short takeoff and landing or V/STOL ground-attack aircraft of the late 20th century. It is primarily used for light...

Kit includes metal landing gear, PE parts and film instrument panels. Completed model will be over 17 inches long. Markings included: VA-82 CVW-8, USS Nimitz 1978 VA-192 CVW-11, USS Kitty...

The first F-100 was delivered to the USAF in 1953, becoming the first fighter to break the sound barrier with a world record of 755 mph. Having been delivered near the end of the Korean War, the...

Includes metal Aileron & Flap shaft, photo-etched parts, full engine detail, ribber tires, and workable flap. Kit contains 362 parts. The P-38 was a radical change for American fighter aircraft...

Kit consists of 267 parts on 7 sprues, film instrument panel, clear engine cover. Markings for VMF-244 Guadalcanal 1942 and VF-6 on USS Enterprise, 1942. Completed kit measures nearly 11" long...