GT Resin

1/48 scale highly detailed resin landing gear for MENG F-4E and F-4G Phantom II kits. Wheels and tires are included.   This is an accessory for a plastic model kit. Assembly and painting...

Includes parts to build two seats.

Set completes the prominent details Meng missed on their F-4G Wild weasel kit. Included in the set are:- Lower fuselage low band antenna with backing plate- Vertical fin low band antenna for each...

  One piece to fit the new F-4E and F-4G Phantom kits from Meng. These drop in fit of the kit part assembly and save hours of filling and painting of the kit parts. The Intakes are cast in...

  The Meng F-4G is a fabulous kit, but Meng missed a few key elements that all F-4G;s carried. One item is the belly Strap used to strengthen the wings with the addition of the leading edge...

• Highly detailed inner and outer splitter plates replicating that of the real aircraft• Highly detailed J-79 fans. One set of USN and one set of USAF with Cartridge Starter fan...

SEAMLESS Intake Ducts for “NEW Line of TAMIYA F-4 Phantom kits.”These are designed to be a drop in fit replacing the kit parts eliminating the need to fill and sand the intakes to remove...

USN style inner wing pylons with missile rails. The Bolo F-4C’s carried this pylon/missile rail set up during that time, as the rounded USAF style pylons were just bing introduced and not yet...

Smooth nose cone for the Tamiya F-4 C/D kit. Some aircraft involved in operation Bolo, including Col. Robin Olds mount are believed to have had smooth nose cones during the time period of Operation...

A highly detailed upgrade for Revell Phantoms in 1/32 Scale. The Exhausts fit the F-4 E/F/G and RF-4E kits and feature accurate Nozzles, burner tubes, and rear engine face.

Highly detailed 1/32 J-79 engine set with long nozzles for Tamiya F-4 E,EJ, and J kits. Highly detailed and sized correctly to fit the Tamiya kit. A real upgrade over the undersized kit parts.

Highly detailed 1/32 J-79 Engine set for Tamiya F-4 C/D kit and Revell RF-4C kits. These short exhaust cans are correctly sized and a must for either kit build.

Resin seamless intakes to fit the Revell kits.

For the Tamiya kit Resin seamless intakes to fit the Tamiya F4J kits. The set includes a highly detailed splitter plate that is separate from the intake to ease painting of the model. ...

1/48 scale highly detailed under wing belly strap and reinforcing plates used on F-4E,G,S and FG.1/FGR.2 Phantoms. Shown in the second picture is the Hasegawa bottom wing. It also fits all...

Full Seamless Intake Set for the Hasegawa British 1/48 FG.1 and FGR.2 ( F-4 K/M) Phantom kits. The set contains:‹¨«?‹¨« Full seamless intakes cast in white resin, ‹¨«?‹¨« Highly detailed...

1/48 scale conversion set to convert the Academy/Eduard F-4C kits into a Wild Weasel attacker. The set includes: ‹¨«?‹¨« NEW. Strike camera insert for forward fuselage bottom replaces the...

1/48 scale conversion set to convert the Zoukei-Mura F-4C kits into a Wild Weasel attacker. The set includes: ‹¨«?‹¨« NEW. Strike camera insert for forward fuselage bottom t ‹¨«?‹¨« ...

For the Hasegawa kit For advanced modellers only. NOTE - cutting the kit parts will be required to install these intakes.

For the Academy/Eduard kit Fit all Academy and Eduard F-4 Phantom kits. Our Seamless intakes replace the multipart kit intakes. In addition, the intake set comes with a two part detailed...

For the Zoukei-Mura kit Seamless intakes to replace the multipart kit intakes. In addition, the intake set comes with a two part detailed splitter plate to facilitate easy painting and adding...

Kit nozzles are on the left while the GT Resin nozzles are on the right. For the Zoukei-Mura kit 1/48 scale detailed replacement nozzles for Zoukei-Mura F-4J/S. These are direct replacements for...

1/32 Scale F-4D Phantom cockpit resin set for Tamiya F-4C/D kit. Set features :ƒ?› Highly detailed tub for the ƒ??Dƒ? Phantom that is easy to finish and install and bulkheads in their correct...

1/32 Scale F-4C Phantom cockpit resin set for Tamiya F-4C/D kit. Set features :ƒ?› Highly detailed tub for the ƒ??Cƒ? Phantom that is easy to finish and install and bulkheads in their...

Includes parts to build two seats.

1/32 Scale F-4C Phantom cockpit resin set for Tamiya F-4C/D kit. Set features :ƒ?› Highly detailed tub for the ƒ??Cƒ? Phantom that is easy to finish and install and bulkheads in their correct...

GTR 32083 is a 1/32 Scale resin cockpit set for the Revell RF-4C Kits. The set is made for the US late version that has the side stick radar controller and ARN-101 capability. Included...

Limited edition cockpit set GTR32071 for the Revell F-4G Wild Weasel kits. Includes: - Highly detailed tub with correct rear bulkhead and detailed rear deck - Highly detailed Mk 7 seats...

1/32 Scale F-4E/F/G Slatted wing upgrade - Also fit the RF-4C?E kits if building the Greek Slatted wing Recce! The Set is the finest slat wing kit ever offered for upgrading the Revell F-4E/F/G ...

For the Revell kit

The early McDonnell Douglas F-4 Wing Drop Tank Set is made for the Tamiya and Revell F-4 and RF-4 Phantom kits. These are the original styled tanks used on the Phantoms and Never before...

Set includes parts to build one drop tank

Original Old Style Center Line Drop Tank for 1/32 scale F-4 Phantom kits. Tank is a necessary extra when building the Tamiya F-4C/D kit as this kit does not come with a Centerline drop tank, but most...

GTR32059 is and updated rerelease of our 1/32 scale , F-4B/N Super Set. It contains all of the necessary parts to convert any 1/32 scale Tamiya F-4J kit into any F-4B/N variant. It...

A limited re-release of the highly detailed 1/32 Scale GT Resin F-4G Wild Weasel Super Set for converting either the F-4E /EJ kits into this deadly Wild Weasel Version. The set has...

GTR 32058. F-4S Conversion Set for Tamiya F-4J kits. The GTR set is the only modern and complete conversion set to turn Tamiya‹¨«??s F-4J kit into the F-4S. The kit features the latest in CAD...

1/32 Scale F-4E Slat Wing Set with TISEO made for the Tamiya F-4E/EJ kit The Set is the finest slat wing kit ever offered for converting the Tamiya hard wing f-4E kits into the Slat wing version...

1/32 F-4E/G Belly Strap. Fits both Revell and Tamiya Kits. The belly strap was used on all of the hard wing F-4E‹¨«??s (about 1/3 of those built) when upgraded with maneuvering slats. All...

1/32 F-4G corrected nose and complete Antenna set. Add the parts Revell got wrong and left missing that are necessary to make an accurate WW from Revell‹¨«??s kit.

1/32 F4E/F corrected nice for Revell Phantoms.Includes detailed gun muzzle and both styles muzzle fairing,

ALQ-71 ECM pod for F-4 Phantom

For the Tamiya kit Resin seamless intakes to fit the Tamiya F-4C/C/E/EJ kits. This set includes a highly detailed splitter plate that is separate from the intake to ease painting of the model...